Hi
Goal is to :
1. up an usb stick with dtb --> To provide firmware after U-BOOT
2. create a sd card / emmc card with U-BOOT --> to boot (i Think also that for
AllWinner you have no need to install dtb on emmc / sdcard)
3. from u-BOOT
usb start
reboot
4. start on USB Stick.
a) Where did you install U-BOOT ?
b) I am not sure thae for pinebook which TTL to use :
cu -s 115200 -l /dev/cuaU0 (for me on RockPro64)
Oliv.
On Wed, 08 Apr 2020 19:53:14 +0200
"Alexander Shendi (Web.DE)" <alexander.she...@web.de> wrote:
> Hi,
>
> I've been trying to install OpenBSD-current/arm64 on my 11" 1080p Pinebook.
>
> I did the following (under NetBSD 9, if it's of interest)
> 1. Download miniroot67.fs
> 2. Download the dtb package
> 3. Download the u-boot-aarch64 package.
> 4. Execute (as root) "dd if=Downloads/miniroot67.fs of=/dev/rld0c bs=1m
> conv=sync"
> 5. Mount /dev/ld0e on /mnt
> 6. Execute "mkdir /mnt/vendor/"
> 7. Unpack the dtb package. Copy the file sun50i-a64-pinebook.dtb to
> /mnt/vendor.
> 8. Unmount /mnt.
> 9. Unpack the u-boot-aarch64 package. Locate the file
> "u-boot-sunxi-with-spl.bin".
> 10. Execute "dd if=u-boot-sunxi-with-spl.bin of=/dev/rsd0c bs=1024 seek=8
> conv=sync"
> 11. Reboot
> 12. Connect an amd64 machine via serial cable to the Pinebook. Execute
> "minicom -D /dev/cuaU0" as root.
>
> I fail to see any output on either the Pinebook's screen or the serial
> console.
> In fact minicom protests that /dev/cuaU0 isn't configured.
>
> Any help will be appreciated.
>
> Best Regards,
>
> Alexander
>
>
> --
> You have zero privacy anyway. Get over it.
>
> Scott McNealy 1999
--
burelli.fr <oliv...@burelli.fr>
