> Date: Mon, 30 Jul 2018 13:46:58 +0200 > From: Robert <info...@die-optimisten.net> > > Hi, > > Using the 28.7. arm64 snapshot (miniroot63.fs), the NIC does not work > on my NanoPi A64 (phy not detected). > Full log below. > > It seems that this is a U-boot or even ARM firmware problem (?). I also > tried to compile the latest U-boot and firmware (both apritzel and ARM) > with no luck (no network at all). > > But I would also like to ask here - has someone successfully run > OpenBSD on the NanoPi A64? > Asking, since https://www.openbsd.org/arm64.html states > " OpenBSD/arm64 runs on the following hardware: > Allwinner A64/H5 > NanoPi A64 > " > and > "Ethernet > dwxe(4) integrated Allwinner EMAC 10/100/Gigabit Ethernet on > Allwinner A64/H5 > " > > So I *guess* it has worked for someone at some point?
Yes. However, I used my own device tree that enables the network interface. Neither the u-boot device tree, nor the Linux mainline device tree properly enables the network interface :(. I'll see if I can patch the u-boot and dtb ports this week.
