On Thu, Jun 30, 2016 at 03:21:18PM +1000, Jonathan Gray wrote: > On Wed, Jun 29, 2016 at 05:39:47PM +0300, Artturi Alm wrote: > > On Wed, Jun 29, 2016 at 02:44:29PM +1000, Jonathan Gray wrote: > > > On Wed, Jun 29, 2016 at 04:21:39AM +0000, Karl Hammerschmidt wrote: > > > > Is anyone else interested in their boards? > > > > > > > > They were very willing to provide extra documentation when asked, > > > > including a schematic for one of their LCD drivers and an unpublished > > > > datasheet for the AXP228 PMIC used on some of their boards. They also > > > > offered free boards to the FreeBSD guys several months ago, but there > > > > were no replies. > > > > > > > > It would be a different SoC, though (Allwinner H3, Samsung 4412, 4418, > > > > 6818). On a positive note, I haven't found any mention yet of closed > > > > binaries like the ODRIOD C1. (Doesn't mean there aren't any, and I'm > > > > still looking...) > > > > > > > > > > The focus is on the cubox i4pro and to a lesser extent the beaglebone > > > black. Boards that aren't included in the main u-boot repository > > > are unlikely to support the bootloader which requires efi. > > > > > > > Wondering about how i should interpret that; i got yet another board with > > SoC > > by Allwinner/sunxi(Pine64+) waiting at the post office for pickup, that i > > had > > already began writing the support for(CortexA53) into armv7. Wasted effort? > > > > -Artturi > > > > Why not finish support for the a10 first? It still lacks an mmc driver. >
http://marc.info/?l=openbsd-arm&m=146352442215755&w=2 ^s/arm88k/armv7/ for two #includes, and you'll have a working mmc driver. I was unaware what the code for looking up the pin to use for CD should look like w/fdt, so i didn't include it, but the driver does work, as is. > Patrick's awge driver could be adapted to fdt and committed as well > for example, alongside the other existing drivers. That would be great :) -Artturi
