I'll update and try, but I don't think it will help, I noticed this problem since F25+ days.
Thx. On Sat, Oct 6, 2018 at 4:27 AM Peter Robinson <[email protected]> wrote: > On Fri, Oct 5, 2018 at 8:24 PM solarflow99 <[email protected]> wrote: > > > > well i'll be, it works for you. I wonder if it could be a hardware > problem then, this is really weird. > > 4.17.3-200.fc28.armv7hl > > Th 4.17.3 kernel is ancient, any reason not to move to 4.18.x (we're > currently at 4.18.11 as stable, and 4.18.12 in testing) as they have a > lot of CVEs fixed and other issues. > > > On Thu, Oct 4, 2018 at 1:07 AM Peter Robinson <[email protected]> > wrote: > >> > >> On Thu, Oct 4, 2018 at 1:12 AM solarflow99 <[email protected]> > wrote: > >> > > >> > Does anyone need any more info? I suspect this is a bug. > >> > >> I've just run exactly the same commands as you on my network, I don't > >> have a trunk configured I could plug the RPi2 into to see if it worked > >> but the output looks sane to me: > >> > >> # ip link add link eth0 name eth0.1 type vlan id 1 > >> # ip l > >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > >> mode DEFAULT group default qlen 1000 > >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > >> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel > >> state UP mode DEFAULT group default qlen 1000 > >> link/ether b8:27:eb:db:ff:1b brd ff:ff:ff:ff:ff:ff > >> 3: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > >> mode DEFAULT group default qlen 1000 > >> link/ether b8:27:eb:db:ff:1b brd ff:ff:ff:ff:ff:ff > >> # ip -d addr show eth0.1 > >> 3: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN > >> group default qlen 1000 > >> link/ether b8:27:eb:db:ff:1b brd ff:ff:ff:ff:ff:ff promiscuity 0 > >> vlan protocol 802.1Q id 1 <REORDER_HDR> numtxqueues 1 numrxqueues > >> 1 gso_max_size 65536 gso_max_segs 65535 > >> > >> # nmcli d > >> DEVICE TYPE STATE CONNECTION > >> eth0 ethernet connected eth0 > >> lo loopback unmanaged -- > >> eth0.1 vlan unmanaged -- > >> > >> # lsmod | grep q > >> 8021q 32768 0 > >> garp 16384 1 8021q > >> mrp 20480 1 8021q > >> > >> This is Fedora 29 with 4.18.11-301.fc29 kernel, I don't see mention of > >> which Fedora/kernel you have. > >> > >> Peter > >> > >> > On Mon, Oct 1, 2018 at 4:06 PM solarflow99 <[email protected]> > wrote: > >> >> > >> >> oh sorry for making it sound like that, I didn't want to be rude at > all. I have a raspi 2 model B, it says Broadcom BCM2836, is there any > other info you might still need? > >> >> > >> >> > >> >> > >> >> On Mon, Oct 1, 2018 at 3:52 PM Peter Robinson <[email protected]> > wrote: > >> >>> > >> >>> On Mon, Oct 1, 2018 at 11:36 PM solarflow99 <[email protected]> > wrote: > >> >>> > > >> >>> > its listed below in the lsusb command, it would be the same one > the raspi comes with not like I can add a different NIC. > >> >>> > >> >>> 1) you didn't mention anywhere that it was the raspberry pi > >> >>> 2) they don't just come on the Raspberry Pi > >> >>> 3) they can have different PHYs and other such things that can > affect details. > >> >>> > >> >>> I don't ask these questions for the sake of it, if you want > assistance > >> >>> there's no need to be rude. > >> >>> > >> >>> Peter > >> >>> > >> >>> > > >> >>> > On Sun, Sep 30, 2018 at 11:55 PM Peter Robinson < > [email protected]> wrote: > >> >>> >> > >> >>> >> Hi, > >> >>> >> > >> >>> >> > Hi, I used to be able to do with back around the F25 days and > previous. Now I can't do vlans at all anymore. As you can see from the > commands below the vlan id gets set to id 3068862004, and seems to keep > auto incrementing itself, and the kernel module gets loaded but not used. > Does anyone have any ideas? > >> >>> >> > >> >>> >> It should work, it would help if you mentioned the hardware you > are > >> >>> >> using as well as the NIC type/model. > >> >>> >> > >> >>> >> > $ ip link add link eth0 name eth0.1 type vlan id 1 > >> >>> >> > > >> >>> >> > $ ip -d addr show eth0.1 > >> >>> >> > 3: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop > state DOWN group default qlen 1000 > >> >>> >> > link/ether b8:27:eb:20:25:16 brd ff:ff:ff:ff:ff:ff > promiscuity 3068862004 > >> >>> >> > vlan protocol 802.1Q id 3068862004 <REORDER_HDR> > numtxqueues 3068862004 numrxqueues 3068862004 gso_max_size 3068862004 > gso_max_segs 3068862004 > >> >>> >> > > >> >>> >> > $ lsmod | grep q > >> >>> >> > Module Size Used by > >> >>> >> > 8021q 28672 0 > >> >>> >> > garp 16384 1 8021q > >> >>> >> > mrp 16384 1 8021q > >> >>> >> > > >> >>> >> > $ lsusb > >> >>> >> > Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. > SMSC9512/9514 Fast Ethernet Adapter > >> >>> >> > > >> >>> >> > > >> >>> >> > _______________________________________________ > >> >>> >> > arm mailing list -- [email protected] > >> >>> >> > To unsubscribe send an email to > [email protected] > >> >>> >> > Fedora Code of Conduct: > https://getfedora.org/code-of-conduct.html > >> >>> >> > List Guidelines: > https://fedoraproject.org/wiki/Mailing_list_guidelines > >> >>> >> > List Archives: > https://lists.fedoraproject.org/archives/list/[email protected] >
_______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected]
