On Fri, Oct 5, 2018 at 8:24 PM solarflow99 <[email protected]> wrote: > > well i'll be, it works for you. I wonder if it could be a hardware problem > then, this is really weird. > 4.17.3-200.fc28.armv7hl
Th 4.17.3 kernel is ancient, any reason not to move to 4.18.x (we're currently at 4.18.11 as stable, and 4.18.12 in testing) as they have a lot of CVEs fixed and other issues. > On Thu, Oct 4, 2018 at 1:07 AM Peter Robinson <[email protected]> wrote: >> >> On Thu, Oct 4, 2018 at 1:12 AM solarflow99 <[email protected]> wrote: >> > >> > Does anyone need any more info? I suspect this is a bug. >> >> I've just run exactly the same commands as you on my network, I don't >> have a trunk configured I could plug the RPi2 into to see if it worked >> but the output looks sane to me: >> >> # ip link add link eth0 name eth0.1 type vlan id 1 >> # ip l >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >> mode DEFAULT group default qlen 1000 >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel >> state UP mode DEFAULT group default qlen 1000 >> link/ether b8:27:eb:db:ff:1b brd ff:ff:ff:ff:ff:ff >> 3: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN >> mode DEFAULT group default qlen 1000 >> link/ether b8:27:eb:db:ff:1b brd ff:ff:ff:ff:ff:ff >> # ip -d addr show eth0.1 >> 3: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN >> group default qlen 1000 >> link/ether b8:27:eb:db:ff:1b brd ff:ff:ff:ff:ff:ff promiscuity 0 >> vlan protocol 802.1Q id 1 <REORDER_HDR> numtxqueues 1 numrxqueues >> 1 gso_max_size 65536 gso_max_segs 65535 >> >> # nmcli d >> DEVICE TYPE STATE CONNECTION >> eth0 ethernet connected eth0 >> lo loopback unmanaged -- >> eth0.1 vlan unmanaged -- >> >> # lsmod | grep q >> 8021q 32768 0 >> garp 16384 1 8021q >> mrp 20480 1 8021q >> >> This is Fedora 29 with 4.18.11-301.fc29 kernel, I don't see mention of >> which Fedora/kernel you have. >> >> Peter >> >> > On Mon, Oct 1, 2018 at 4:06 PM solarflow99 <[email protected]> wrote: >> >> >> >> oh sorry for making it sound like that, I didn't want to be rude at all. >> >> I have a raspi 2 model B, it says Broadcom BCM2836, is there any other >> >> info you might still need? >> >> >> >> >> >> >> >> On Mon, Oct 1, 2018 at 3:52 PM Peter Robinson <[email protected]> >> >> wrote: >> >>> >> >>> On Mon, Oct 1, 2018 at 11:36 PM solarflow99 <[email protected]> >> >>> wrote: >> >>> > >> >>> > its listed below in the lsusb command, it would be the same one the >> >>> > raspi comes with not like I can add a different NIC. >> >>> >> >>> 1) you didn't mention anywhere that it was the raspberry pi >> >>> 2) they don't just come on the Raspberry Pi >> >>> 3) they can have different PHYs and other such things that can affect >> >>> details. >> >>> >> >>> I don't ask these questions for the sake of it, if you want assistance >> >>> there's no need to be rude. >> >>> >> >>> Peter >> >>> >> >>> > >> >>> > On Sun, Sep 30, 2018 at 11:55 PM Peter Robinson <[email protected]> >> >>> > wrote: >> >>> >> >> >>> >> Hi, >> >>> >> >> >>> >> > Hi, I used to be able to do with back around the F25 days and >> >>> >> > previous. Now I can't do vlans at all anymore. As you can see >> >>> >> > from the commands below the vlan id gets set to id 3068862004, and >> >>> >> > seems to keep auto incrementing itself, and the kernel module gets >> >>> >> > loaded but not used. Does anyone have any ideas? >> >>> >> >> >>> >> It should work, it would help if you mentioned the hardware you are >> >>> >> using as well as the NIC type/model. >> >>> >> >> >>> >> > $ ip link add link eth0 name eth0.1 type vlan id 1 >> >>> >> > >> >>> >> > $ ip -d addr show eth0.1 >> >>> >> > 3: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state >> >>> >> > DOWN group default qlen 1000 >> >>> >> > link/ether b8:27:eb:20:25:16 brd ff:ff:ff:ff:ff:ff promiscuity >> >>> >> > 3068862004 >> >>> >> > vlan protocol 802.1Q id 3068862004 <REORDER_HDR> numtxqueues >> >>> >> > 3068862004 numrxqueues 3068862004 gso_max_size 3068862004 >> >>> >> > gso_max_segs 3068862004 >> >>> >> > >> >>> >> > $ lsmod | grep q >> >>> >> > Module Size Used by >> >>> >> > 8021q 28672 0 >> >>> >> > garp 16384 1 8021q >> >>> >> > mrp 16384 1 8021q >> >>> >> > >> >>> >> > $ lsusb >> >>> >> > Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. >> >>> >> > SMSC9512/9514 Fast Ethernet Adapter >> >>> >> > >> >>> >> > >> >>> >> > _______________________________________________ >> >>> >> > arm mailing list -- [email protected] >> >>> >> > To unsubscribe send an email to [email protected] >> >>> >> > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html >> >>> >> > List Guidelines: >> >>> >> > https://fedoraproject.org/wiki/Mailing_list_guidelines >> >>> >> > List Archives: >> >>> >> > https://lists.fedoraproject.org/archives/list/[email protected] _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected]
