Hi, > Hi, I used to be able to do with back around the F25 days and previous. Now > I can't do vlans at all anymore. As you can see from the commands below the > vlan id gets set to id 3068862004, and seems to keep auto incrementing > itself, and the kernel module gets loaded but not used. Does anyone have any > ideas?
It should work, it would help if you mentioned the hardware you are using as well as the NIC type/model. > $ ip link add link eth0 name eth0.1 type vlan id 1 > > $ ip -d addr show eth0.1 > 3: eth0.1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group > default qlen 1000 > link/ether b8:27:eb:20:25:16 brd ff:ff:ff:ff:ff:ff promiscuity 3068862004 > vlan protocol 802.1Q id 3068862004 <REORDER_HDR> numtxqueues 3068862004 > numrxqueues 3068862004 gso_max_size 3068862004 gso_max_segs 3068862004 > > $ lsmod | grep q > Module Size Used by > 8021q 28672 0 > garp 16384 1 8021q > mrp 16384 1 8021q > > $ lsusb > Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 > Fast Ethernet Adapter > > > _______________________________________________ > arm mailing list -- [email protected] > To unsubscribe send an email to [email protected] > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedoraproject.org/archives/list/[email protected] _______________________________________________ arm mailing list -- [email protected] To unsubscribe send an email to [email protected] Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/[email protected]
