Pulse audio is not necessary and confuses things because everything from one system goes through one channel on the other. Pulse and alsa can coexist only under certain circumstances. Does speaker-test work? It's not Pulse Audio.
_________________________ Life will be better once the Republicans move to Mars. _________________________ FIRE TRUMP! On Wed, Nov 4, 2026, 11:02 AM Ralf Mardorf <[email protected]> wrote: > On Wed, 2026-11-04 at 15:49 +0100, [email protected] wrote: > > Nevertheless the output is almost not to hear. > > Hi Markus, > > if what you're hearing is "just" too quiet, it could be an impedance > issue. High-quality hi-fi headphones and studio headphones have high > impedance. An onboard audio output might not be able to drive them > properly. On the other hand, while I would expect the signal to be > relatively quiet in this case, it should certainly be louder than > "almost not to hear". > > I assume the headphones work with other devices, so the cables, plugs, > etc., are fine. I would still recommend checking one thing, though. If > you're using a 6.3-mm-to-3.5-mm adapter, try a different one, maybe the > 3.5-mm plug isn’t inserted far enough, or it's too deep, or for some > reason it just doesn't fit properly into the computer's jack. > > Regards, > Ralf > > > _______________________________________________ > Alsa-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/alsa-user >
_______________________________________________ Alsa-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/alsa-user
