Nathan Caldwell wrote: > On 8/9/06, James Courtier-Dutton <[EMAIL PROTECTED]> wrote: >> On 25/07/06, Nathan Caldwell <[EMAIL PROTECTED]> wrote: >>> On 7/20/06, James Courtier-Dutton <[EMAIL PROTECTED]> wrote: >>>> Nathan Caldwell wrote: >>>>> Anyone got even an idea on what I could try? >>>>> >>>>> -Nathan >>>>> >>>>> On 7/12/06, Nathan Caldwell <[EMAIL PROTECTED]> wrote: >>>>> >>>>>> I have an Audigy2 ZS, and can't get the Center or LFE channels to >>>>>> work. If I run speaker-test -c6 -Dsurround51 I get output from the >>>>>> front and back speakers (and sub) when it test the front and rear >>>>>> channels, but there is no output when it tests the Center and LFE >>>>>> channels. >>>>>> >> Please post the output of >> cat /proc/asound/cards >> >> You should also note that on the Audigy2 the hw:0,0 hw:0,1 etc. have >> no relation to which speaker the sound comes from. >> If the sound card is already correctly recognised, it should have >> output from all speakers. >> The most likely problem here is actually a loose connection somewhere, >> or a cable connected to the wrong jack socket. The reason for this, is >> that the output for Front, Rear, Center/LFE all go through the same >> DAC, so if one works, there is no reason why they don't all work. >> >> James >> > > Thanks again, James. > While that may be the most likely issue, I know that it is not. I can > reboot into Windows (boo, hisss!) without changing a thing with my > speaker setup and 5.1 works just fine. Also as I said before I get > output from my sub with speaker-test, it's just on all channels > (except when it tests Center and LFE which have NO output). So when it > tests FR, FL, BR, BL I can hear the low freq going to the sub, but it > shouldn't be. It acts like it's in 4.0 mode all the time. > > > -Nathan > > $ cat /proc/asound/cards > 0 [Audigy2 ]: Audigy2 - Audigy 2 ZS [SB0350] > Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) > at 0xac00, irq 82 >
We don't have your particular sound card, so I cannot say "it works for me". Would you be able to take a look at the sound card, and try to read the names from all the chips on the card. Maybe it is using some different DAC that would need special programming. James ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
