Dne ne 2. červen 2002 18:12 jste napsal(a):
> Finaly, using the Last CVS code (1st June), I was able to make it work !
>
> thanks everybody,
>
> David

Did you patch the kernel (just patch alsa-kernel/pci/ac97/ac97_codec.c)
mentioned below ?
or you just compiled latest cvs ??

-----------------------------------------------------------------------------------------------
I have just one question, how is it possible that via8233 have irq 22 , while 
in windows it's 10 ??
Is that normal or caused by the wrong driver ?

cat /proc/asound/cards
0 [card1          ]: VIA8233 - VIA 8233
                     VIA 8233 at 0xe400, irq 22
------------------------------------------------------------------------------------------------

Thanks

John

> Le Sun, 5 May 2002 01:34:56 +0200
>
> Sundance <[EMAIL PROTECTED]> a écrit:
> > You wrote:
> > >> [Summary: ALSA doesn't work with the VIA VT8233A chipset, found on
> > >> some KT333-based motherboards]
> > >
> > > I have this board and I get the same problem.
> > > It uses a Realtek chipset for the sound (ALC 650) that is not listed in
> > > the ac97_codec.c file.
> >
> > Thank you. :) By investigating further I actually discovered that.
> > Actually, based on this:
> > http://www.linuxhq.com/kernel/v2.4/unofficial/patch200202/44.html
> > adding ALC 650 awareness to ALSA 0.9.0rc1 isn't too hard, theorically:
> > just patch alsa-kernel/pci/ac97/ac97_codec.c with the following:
> >
> > -------------------------------------------------------------------------
> >-- --- alsa-kernel/pci/ac97/ac97_codec.c.old       Sat May  4 04:27:30
> > 2002 +++ alsa-kernel/pci/ac97/ac97_codec.c   Sat May  4 04:33:49 2002 @@
> > -108,6 +108,7 @@
> >  { 0x414c4310, 0xfffffff0, "RL5382",            NULL },
> >  { 0x414c4320, 0xfffffff0, "RL5383",            NULL },
> >  { 0x414c4710, 0xffffffff, "ALC200/200P",       NULL },
> > +{ 0x414c4720, 0xfffffff0, "ALC650",           NULL },
> >  { 0x43525900, 0xfffffff8, "CS4297",            NULL },
> >  { 0x43525910, 0xfffffff8, "CS4297A",           NULL },
> >  { 0x42525920, 0xfffffff8, "CS4294/4298",       NULL },
> > -------------------------------------------------------------------------
> >--
> >
> > That's in theory anyway.
> > The bad news is that... in practice it's not sufficient to get it to
> > work. Oh well.
> > More precisely, the system still freezes if I modprobe snd-via8233 from
> > runlevel 4 with the desktop environment running. It still works when I
> > modprobe at runlevel 1, but the sound still doesn't work -- in a
> > different way now. ALSA software actually /can/ open the sound device
> > now, but when it tries to write to it, I get an I/O error.
> >
> > > I also try the drivers provided by realtek (based on Alsa 0.5.10) and
> > > they do not work too.
> > > ftp://ftp.realtek.com.tw/sound/ac97codec/linux/linux.zip
> >
> > I'll give them a look. Thanks. :)
> > Maybe by fiddling with them and ALSA 0.9.0rc1 I can get the whole thing
> > to work (yeah, well, I can dream, can't I? :)).
> > From the look of those sources there is some register pokepoking to do
> > when writing to an ALC 650 chipset. I'll try just that.
> >
> > CC'ed to alsa-devel, since it's kinda devel-relevant now.
> > (The original message, for the sake of alsa-devel's readers, can be found
> > here:
> > http://www.mail-archive.com/[email protected]/msg03164.html
> >)
> >
> > -- S.

_______________________________________________________________

Don't miss the 2002 Sprint PCS Application Developer's Conference
August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm

_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to