Did you rectify AC current? That is pretty close to the extent of my knowledge about electronics. I once sawed a 2 to 4 inch rectifying diode in half to see if I could learn anything. (That was a very long time ago.) I expected to see some fancy striations but the lighter sections were just distributed in flattened splotches. Jim Bromer
On Thu, Jun 27, 2019 at 6:08 PM <[email protected]> wrote: > This oscillator has no transistor in it, it is 2 caps and the rest is > resistor balancing, and the bastard is f'n hard to start up! I was there > for half an hour before i got it to buzz at around 10hz. This is my video > proof to myself just so I know the bloody thing even works at all! > > > https://www.youtube.com/watch?v=YHiS8HLVkFs&feature=youtu.be > > > Because its just caps and resistors, if you use the pcb as the > capacitor, it makes a pretty componentless board, but it has to be double > sided. > > After I finally get this down pat, I then need an amplifier then the > whole computer can be done with the pcb to store the state of the machine. > (it means the pcb itself stores the temprary memory for the computer.) > > and theres no component, but you need to print the resistors on board > with it and they probably blow off the board if your not careful with the > wattage. > *Artificial General Intelligence List <https://agi.topicbox.com/latest>* > / AGI / see discussions <https://agi.topicbox.com/groups/agi> + > participants <https://agi.topicbox.com/groups/agi/members> + delivery > options <https://agi.topicbox.com/groups/agi/subscription> Permalink > <https://agi.topicbox.com/groups/agi/Td7a52e89327738b7-M4656f768391e33a5235eb82e> > ------------------------------------------ Artificial General Intelligence List: AGI Permalink: https://agi.topicbox.com/groups/agi/Td7a52e89327738b7-Mbdf476596edf9578b871b414 Delivery options: https://agi.topicbox.com/groups/agi/subscription
