The usual suspects are DDB Unlimited and American Products. There are others as well. They can add slack storage boxes onto the cabinets for sure.
They're never cheap. You could build a building for what a cabinet costs. They're really for when you need the small footprint, or for the logistical simplicity of dropping a cabinet on a pad vs everything you need to go through for constructing a building. You also get electrical pre-wired and HVAC built in, so it can eliminate having to get an HVAC contractor and reduce the scope of work for an electrician to just hooking up the service drop. If your capital is cheaper than your labor, then cabinets are great. If you abandon rack mount and go to panel or DIN mounted hardware, then you can get industrial controls enclosures for $hundreds rather than $thousands. This is the direction I went when the budget was tighter. -Adam ________________________________ From: AF <af-boun...@af.afmug.com> on behalf of Dev <d...@logicalwebhost.com> Sent: Tuesday, January 7, 2025 12:04 PM To: AnimalFarm Microwave Users Group <af@af.afmug.com> Subject: Re: [AFMUG] Small Outdoor Cabinet Indeed, it would be nice to have a source for an affordable version of this, or something close that costs less than a used Hyundai. > On Jan 7, 2025, at 8:39 AM, Mark - Myakka Technologies via AF > <af@af.afmug.com> wrote: > > I'm looking for a small outdoor cabinet may 19" rack about 10U. Would like > something that could work as a Handhole/Cabinet where I can store fiber loop > under it. Never had to shop for anything like this. > > > -- > > Thanks, > Mark mailto:m...@mailmt.com > > Myakka Communications > www.Myakka.com<http://www.Myakka.com> > > Serving Manatee and Sarasota Counties with High-Speed Internet for over 20 > years > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
