I don't think you can take a default route on an IX that will have to remain unchanged
On Tue, Apr 25, 2023 at 3:22 PM Sterling Jacobson <sterl...@avative.com> wrote: > Not that I know of. > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Mark - Myakka > Technologies > *Sent:* Tuesday, April 25, 2023 3:52 PM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] BGP Question > > > > Sterling, > > > > Did you have to deal with the BFD / OSPF issues? > > > > -- > > Best regards, > > Mark mailto:m...@mailmt.com <m...@mailmt.com> > > > > Myakka Communications > > www.Myakka.com > > > > ------ > > > > Thursday, April 20, 2023, 11:20:07 AM, you wrote: > > > > We have migrated from v6.x to v7.7 and v7.8 now. OSPF seems to work fine > interacting between the two versions, just have to copy over some settings > appropriately is all. > > > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mark - Myakka > Technologies > *Sent:* Thursday, April 20, 2023 9:03 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] BGP Question > > > > Josh, > > > > I will. I think v7 will be able to handle BGP, OSPF and Filter rules just > fine. Learning the new configure of v7 should not be a huge issue. The > big thing I'm worried about is the OSPF interaction between the versions. > > > > -- > > Best regards, > > Mark mailto:m...@mailmt.com <m...@mailmt.com> > > > > Myakka Communications > > www.Myakka.com > > > > ------ > > > > Thursday, April 20, 2023, 10:52:37 AM, you wrote: > > > > Let us know how that goes - I was just looking at the 2116 myself. > > > > On Thu, Apr 20, 2023 at 10:40 AM Mark - Myakka Technologies < > m...@mailmt.com> wrote: > > Mike, > > > > I think I'll have to upgrade to v7 and a some 2216 units. Guess it is > time to try to integrate some v7 units into the v6 network and see what > happens. > > > > > > -- > > Best regards, > > Mark mailto:m...@mailmt.com <m...@mailmt.com> > > > > Myakka Communications > > www.Myakka.com > > > > ------ > > > > Thursday, April 20, 2023, 10:10:32 AM, you wrote: > > > > Years ago on ROX v6 on a 1036, it would take 5 - 10 minutes for /ip route > print to reflect an upstream change and then another 5 - 10 minutes for the > traffic to actually change directions. > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > > Midwest Internet Exchange > > The Brothers WISP > > > > <https://www.facebook.com/ICSIL> > > <https://www.facebook.com/ICSIL> > * ------------------------------ <https://www.facebook.com/ICSIL>* > > > > > *From: "Josh Luthman" <j...@imaginenetworksllc.com> To: "AnimalFarm > Microwave Users Group" <af@af.afmug.com> Sent: Wednesday, April 19, 2023 > 12:25:14 PM Subject: Re: [AFMUG] BGP Question > <https://www.facebook.com/ICSIL>* > > > > *I want to say my old x86 would do full tables in 3 minutes...that's been > a while. I think the CCR1009/1036/1072 is a couple of minutes, I don't > think it's 10-15 though. <https://www.facebook.com/ICSIL>* > > * <https://www.facebook.com/ICSIL>* > > *On Wed, Apr 19, 2023 at 11:20 AM Mark - Myakka Technologies > <m...@mailmt.com> wrote: <https://www.facebook.com/ICSIL>* > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > *Dennis, Using mikrotik routers. Two MaxxWave x86 i5 8 core 10 years old > v6.47.9 One CCR1072 v6.47.9 Yes taking full tables. Tried BFD while > back. Didn't seem that my upstream was supporting it. Never established a > session. Thinking I may need to start looking at new hardware and v7. But > before I go that route, what should I expect if I do get 3 brand new > CCR2116-12G-4S+ running v7. -- Best regards, Mark > mailto:m...@mailmt.com Myakka Communications www.Myakka.com ------ > Wednesday, April 19, 2023, 11:08:45 AM, you wrote: DB> Really depends on a > lot of things. DB> 1.What router are you using? DB> 2. Are you taking full > tables from all of your upstreams? DB> 3. Are you not using BFD ? DB> 4. > What version of RouterOS are you using? DB> V7 will be faster, 2216 will be > faster than a 1036, your hold time is kinda long.. DB> Dennis Burgess, > Mikrotik Certified Trainer DB> MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE, MTCSE, > HE IPv6 Sage, Cambium ePMP Certified DB> Author of "Learn RouterOS- Second > Edition" DB> Link Technologies, Inc -- Mikrotik & WISP Support Services DB> > Office: 314-735-0270 Website: http://www.linktechs.net DB> Need to > Automate MikroTik Backups: https://cloud.linktechs.net DB> Create Wireless > Coverage's with www.towercoverage.com DB> -----Original Message----- DB> > From: AF <af-boun...@af.afmug.com> On Behalf Of Mark - Myakka Technologies > DB> Sent: Wednesday, April 19, 2023 9:48 AM DB> To: af@af.afmug.com DB> > Subject: [AFMUG] BGP Question DB> We have two circuits coming into our > NOC. We peer with 3 different providers on each circuit. If a circuit > fails, BGP will do it's magic and traffic will start flowing though the > surviving circuit. DB> However, we seemed to get about 5 - 10 minutes of > unstable Internet while this is happening. Is this normal? If not, what > can I do to speed up the process? Is it a function of my routers having to > rebuild routes? Will new faster routers help? Is it a function of > timers? Keep-Alive is 30s and hold is at 90s. Should I investigate BFD? > DB> How fast could I expect to get this fail-over to work under best > conditions? DB> Thanks, DB> Mark > mailto:m...@mailmt.com DB> Myakka Communications DB> > https://imsva91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=www.Myakka.com&umid=08E7599C-F9B1-CC05-BF9C-94CA5B14AB1B&auth=079c058f437b7c6303d36c6513e5e8848d0c5ac4-1a5796e3447e2e1707012b957aa10dd6970458d5 > DB> -- DB> AF mailing list DB> AF@af.afmug.com DB> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list > AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <https://www.facebook.com/ICSIL>* > > > > > > * -- AF mailing list AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <https://www.facebook.com/ICSIL>* > > * <https://www.facebook.com/ICSIL>* > > > > > *-- AF mailing list AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <https://www.facebook.com/ICSIL>* > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Thank you, TJ Trout Volt Broadband 209.480.3122 Cell
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
