We can get drop cable plowed by a reputable, insured contractor for $3.50 on a 
good day, but OSP cable in a duct is a different story.

 

To get under $3.50 we’d be dealing with a one-man band moonlighting as an 
excavator.

 

In NY there’s more work than there are contractors to do it so that may have 
something to do with the prices.

  

 

From: AF <af-boun...@af.afmug.com> On Behalf Of Chuck McCown via AF
Sent: Thursday, December 22, 2022 3:38 PM
To: 'AnimalFarm Microwave Users Group' <af@af.afmug.com>
Cc: Chuck McCown <ch...@go-mtc.com>
Subject: Re: [AFMUG] HDD per foot cost

 

I wish I could get that for plowing.  Normally it is in the $4.50 range 
assuming wide open range.  I have seen it as low as $1.50.  

 

From: dmmoff...@gmail.com <mailto:dmmoff...@gmail.com>  

Sent: Thursday, December 22, 2022 1:33 PM

To: 'AnimalFarm Microwave Users Group' 

Subject: Re: [AFMUG] HDD per foot cost

 

The highest I saw was $50/ft.

 

$6-8 sounds like plowing prices. I’d expect at least $15/ft for HDD.  Whoever’s 
doing it for $6-8/ft don’t lose that guy’s number.

 

 

From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf 
Of Jim Bouse [Brazos WiFi]
Sent: Thursday, December 22, 2022 10:27 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> >
Subject: Re: [AFMUG] HDD per foot cost

 

That varies greatly.  Somewhere between $6-8/ft here in central Texas rural 
roads and rural subdivisions.  Anywhere with more obstructions will cost 
significantly more due to the effort to avoid other utilities.

 

Jim Bouse
Owner - Brazos WiFi
979-999-7000
http://www.brazoswifi.com

 

From: AF <af-boun...@af.afmug.com <mailto:af-boun...@af.afmug.com> > On Behalf 
Of Carl Peterson
Sent: Thursday, December 22, 2022 9:24 AM
To: AnimalFarm Microwave Users Group <af@af.afmug.com <mailto:af@af.afmug.com> >
Subject: [AFMUG] HDD per foot cost

 




What is the going rate per foot for HDD drilling and pullback of two SDR11 
ducts and a trace wire?  Very sandy soil in the FL panhandle.  All materials 
provided?  Around 4-5K' split into three or four runs. 

 

-- 

Carl Peterson

PORT NETWORKS

401 E Pratt St, Ste 2553

Baltimore, MD 21202

(410) 637-3707 

  _____  

-- 
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com> 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to