5 b/hz on Force 200. About 100 meg aggregate. Perfect signal, no noise. Force 300 won't be all that much better unless you have a better signal anyway.
On Tue, May 24, 2022 at 3:26 PM <dmmoff...@gmail.com> wrote: > Yeah I was thinking you’d not quite get a full 100mb on a 20mhz channel. > Might be 80-90. > > I would plan on 5.6ghz and 40mhz. > > > > -Adam > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Steve Jones > *Sent:* Tuesday, May 24, 2022 12:50 PM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] EPMP PTP Throughput > > > > for not critical i use f200 in DFS and 40mhz. Radio speedtests will show > that throughput > > > > On Tue, May 24, 2022 at 11:34 AM Ryan Ray <ryan...@gmail.com> wrote: > > You'll be right on the edge. Should work. > > > > On Tue, May 24, 2022 at 8:25 AM Nate Burke <n...@blastcomm.com> wrote: > > I need to do a 1 mile PTP hop on the cheap. Only looking for ~100mb. I > have a set of EPMP Force 200 radios on the shelf. Can I get 100mb out > of a 20mhz channel in ePTP Mode with a pair of Force200s? I'm pretty > sure a set of Force300's could do it, but the boss want's me to use some > old stock inventory for this. > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
