Yeah, I don't know that you'll reliably get 100mb out of a 20mhz channel, but it should do pretty close in ePTP mode. If you can do a 40mhz channel it'll do it fine... if it's only a 1 mile link, I'd use 40mhz on a DFS channel.
On Tue, May 24, 2022 at 11:51 AM Steve Jones <thatoneguyst...@gmail.com> wrote: > for not critical i use f200 in DFS and 40mhz. Radio speedtests will show > that throughput > > On Tue, May 24, 2022 at 11:34 AM Ryan Ray <ryan...@gmail.com> wrote: > >> You'll be right on the edge. Should work. >> >> On Tue, May 24, 2022 at 8:25 AM Nate Burke <n...@blastcomm.com> wrote: >> >>> I need to do a 1 mile PTP hop on the cheap. Only looking for ~100mb. I >>> have a set of EPMP Force 200 radios on the shelf. Can I get 100mb out >>> of a 20mhz channel in ePTP Mode with a pair of Force200s? I'm pretty >>> sure a set of Force300's could do it, but the boss want's me to use some >>> old stock inventory for this. >>> >>> >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
