Din rail. Almost always just have the rail on plywood or whatever. Need these parts:
Meanwell AD-155B Meanwell DRL-02 Meanwell DRP-03 Three M3x6 screws and two M4x6 screws There are no desks at tower sites, otherwise it would go right next to the under desk 1500w space heater. On Wed, Apr 13, 2022 at 1:25 PM Nate Burke <[email protected]> wrote: > What type of enclosure are you putting it in? I'm guessing it's not just > laying on the floor under someone's desk. > > On 4/13/2022 12:17 PM, Josh Luthman wrote: > > We use the Meanwell > jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2146118_-1 > Meanwell AD-155B for this exact use case. Works in almost every case. > > We found one situation where it wouldn't work. I'm not sure why. We > moved to a Netpower 16p and heavier wire the problems went away. > > On Wed, Apr 13, 2022 at 12:59 PM Aeron Wireless <[email protected]> > wrote: > >> I'm certain that the Meanwell will work. >> >> On Wed, Apr 13, 2022 at 12:37 PM Nate Burke <[email protected]> wrote: >> >>> I was hoping not to. Had to add a repeater to an existing install for >>> the customer to pickup another building. Cat5 goes through an underground >>> conduit and then 150' through a shop building. >>> >>> On 4/13/2022 11:30 AM, Aeron Wireless wrote: >>> >>> Powering the Powerbox via a dc cable isn't an option? >>> >>> On Wed, Apr 13, 2022 at 12:22 PM Nate Burke < <[email protected]> >>> [email protected]> wrote: >>> >>>> I'm trying to run a Mikrotik Powerbox via POE to power a Force300 and >>>> an >>>> EPMP1000 GPS Radio. Given the length of the cable run, the 24V supply >>>> that comes with the Mikrotik is only 20V at the device, and won't power >>>> up the 1000 AP. It's all running with the Cambium 30V POE injector >>>> from >>>> the F300, but I'm afraid if it reboots in the cold, and has to run the >>>> heaters it won't be enough juice to power up. I can find 24V POE's all >>>> day long, but 30V are hard. >>>> >>>> I could use a Meanwell PS (MDR seires Spec sheet says it can be >>>> adjusted >>>> to 30V max) with a MCT POE Injector, but I'm hoping to find something >>>> cleaner, since the POE is just sitting on the floor in an office now. >>>> >>>> >>>> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> >>> >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
