We use the Meanwell jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_2146118_-1 Meanwell AD-155B for this exact use case. Works in almost every case.
We found one situation where it wouldn't work. I'm not sure why. We moved to a Netpower 16p and heavier wire the problems went away. On Wed, Apr 13, 2022 at 12:59 PM Aeron Wireless <b...@aeronwireless.com> wrote: > I'm certain that the Meanwell will work. > > On Wed, Apr 13, 2022 at 12:37 PM Nate Burke <n...@blastcomm.com> wrote: > >> I was hoping not to. Had to add a repeater to an existing install for >> the customer to pickup another building. Cat5 goes through an underground >> conduit and then 150' through a shop building. >> >> On 4/13/2022 11:30 AM, Aeron Wireless wrote: >> >> Powering the Powerbox via a dc cable isn't an option? >> >> On Wed, Apr 13, 2022 at 12:22 PM Nate Burke <n...@blastcomm.com> wrote: >> >>> I'm trying to run a Mikrotik Powerbox via POE to power a Force300 and an >>> EPMP1000 GPS Radio. Given the length of the cable run, the 24V supply >>> that comes with the Mikrotik is only 20V at the device, and won't power >>> up the 1000 AP. It's all running with the Cambium 30V POE injector from >>> the F300, but I'm afraid if it reboots in the cold, and has to run the >>> heaters it won't be enough juice to power up. I can find 24V POE's all >>> day long, but 30V are hard. >>> >>> I could use a Meanwell PS (MDR seires Spec sheet says it can be adjusted >>> to 30V max) with a MCT POE Injector, but I'm hoping to find something >>> cleaner, since the POE is just sitting on the floor in an office now. >>> >>> >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
