I'm certain that the Meanwell will work. On Wed, Apr 13, 2022 at 12:37 PM Nate Burke <n...@blastcomm.com> wrote:
> I was hoping not to. Had to add a repeater to an existing install for the > customer to pickup another building. Cat5 goes through an underground > conduit and then 150' through a shop building. > > On 4/13/2022 11:30 AM, Aeron Wireless wrote: > > Powering the Powerbox via a dc cable isn't an option? > > On Wed, Apr 13, 2022 at 12:22 PM Nate Burke <n...@blastcomm.com> wrote: > >> I'm trying to run a Mikrotik Powerbox via POE to power a Force300 and an >> EPMP1000 GPS Radio. Given the length of the cable run, the 24V supply >> that comes with the Mikrotik is only 20V at the device, and won't power >> up the 1000 AP. It's all running with the Cambium 30V POE injector from >> the F300, but I'm afraid if it reboots in the cold, and has to run the >> heaters it won't be enough juice to power up. I can find 24V POE's all >> day long, but 30V are hard. >> >> I could use a Meanwell PS (MDR seires Spec sheet says it can be adjusted >> to 30V max) with a MCT POE Injector, but I'm hoping to find something >> cleaner, since the POE is just sitting on the floor in an office now. >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
