Yep. Just enough for a slack coil or a slim splice case. The idea is that we can use UDOT condut but they will not allow slack or splice case inside their HHs. It pissed me off that I would have to install a full sized HH side by side, with their case concrete coller beside each side of their HHs. So they said if I could come up with a slim line Tier 22 box I would be golden. I think I am golden.
Chuck McCown McCown Technology Corporation 8401 N Commerce Dr Lake Point, Utah 84074 801-250-9503 435-830-4306 cell www.mccowntech.com www.microtrench-blades.com www.terabitnetworks.com From: Mike Hammett Sent: Saturday, January 29, 2022 6:55 PM To: AnimalFarm Microwave Users Group Cc: ch...@go-mtc.com Subject: Re: [AFMUG] Steel handholes 6.... inches? ----- Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP -------------------------------------------------------------------------------- From: "Chuck McCown via AF" <af@af.afmug.com> To: af@af.afmug.com Cc: ch...@go-mtc.com Sent: Saturday, January 29, 2022 7:47:37 PM Subject: [AFMUG] Steel handholes Hello people, I got tired of the lack of handholes in the supply chain. Years ago I was making polymer handhole lids with our logo in it. It was a vanity project and I learned that if you want to be in the polymer handhole business you need to take delivery of polyester resin by the railcar. Else you will not make a profit. So, lately I am constructing in the UDOT ROW. They require tier 22 rated handholes. I only need slack storage because there are super long distances between areas where I actually need to access the fiber but I do have at 2500’ or 3000’ limit for blowing. So I created a galvanized steel 24x18 inch hand hole that is 6’ wide. It will hold 150’ of slack of the largest cables. It can be installed with just a vac ex. We have to come out of UDOT HHs that we are sharing and go into our own. They will not allow slack loops in their HHs. This will make it so we don’t have to install a full 18 X 24 X 24 or 36” deep polymer HH just to store slack. My handhole is light enough that one stout person can pick it up and place it. Maybe others are interested? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
