Not knowing the answer, I wonder if v6 needs a certain mtu. Sent from my iPhone
> On Feb 14, 2021, at 1:12 PM, Nate Burke <n...@blastcomm.com> wrote: > > I have a P2P circuit plugged into a CRS317-1G-16S+ and setting PVID3000 on > that bridge interface. A Mikrotik CCR1009 is plugged into another port on > the CRS317 set for trunked VLan3000. I can move IPv4 traffic on Vlan3000 and > to the other end of the P2P circuit just fine, but I cannot move any IPv6 > traffic on Vlan3000. > > The Vlan shouldn't care about IP4 vs IP6 traffic, right? I just want to make > sure I'm not causing my own problem before pointing my finger at the Circuit. > > The IPv6 package is not installed on the CRS317, because it's just acting as > a switch, it's not doing any routing. That shouldn't matter, right? > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
