Will this FS stuff take a staple and can you push it through microduct? From: Mark Radabaugh Sent: Wednesday, August 12, 2020 7:23 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] CPE Install Costs.xlsx
I fhink you preterminated indoor jumper cost is too high. These https://www.fs.com/c/armored-patch-cables-220 work fine for the inside wiring from the outdoor box to the wall plate or direct to CPE if you are not doing a inside jack. They are not UV rated so you have to make sure you don’t leave them exposed outdoor. You can pop the outer SC portion off the jumper if you want to pass through a smaller hole. Mark On Aug 12, 2020, at 7:00 PM, ch...@wbmfg.com wrote: <CPE Install Costs.xlsx> -------------------------------------------------------------------------------- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
