Chuck, we are close to your proposed design. We use a Tii 506f NID, fusion splice pigtail, pre-terminated cable assembly from NID to biscuit style wall jack. Either a corning RuggedDrop for ~$25-35 or one of the blue fiberstore cables Mark linked, which are our default unless we need to house wrap or leave some exposed outside. From the Biscuit jack to modem is also one of the blue armored FS patch cables. I think this approach is the best balance of cheap and easy to install. You do need to have a tech that can do a single fusion splice but otherwise it's an easy job.
On Wed, Aug 12, 2020 at 9:23 PM Mark Radabaugh <m...@amplex.net> wrote: > I fhink you preterminated indoor jumper cost is too high. These > https://www.fs.com/c/armored-patch-cables-220 work fine for the inside > wiring from the outdoor box to the wall plate or direct to CPE if you are > not doing a inside jack. They are not UV rated so you have to make sure > you don’t leave them exposed outdoor. You can pop the outer SC portion > off the jumper if you want to pass through a smaller hole. > > Mark > > On Aug 12, 2020, at 7:00 PM, ch...@wbmfg.com wrote: > > <CPE Install Costs.xlsx> > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
