No answer to your SBRS question but… eventually the old style 450 case leaks water and the first place it goes is right down the center pin of the RF connector and into the cable. Silicon caulk and/or electrical tape along the top and side gaps goes a long way toward keeping the water out.
Happens on 5.7 and 3.65 Mark > On Aug 10, 2020, at 9:46 AM, Ken Hohhof <af...@kwisp.com> wrote: > > Has anyone figured out the best procedure for replacing a Cambium CBRS AP? > > I’m guessing there is something more elegant and less disruptive than > deleting the whole sector while the tech is swapping out the AP and then re > importing into cnMaestro from a spreadsheet and hoping everything goes > smoothly and customers are only down for a few minutes. > > I’m talking about replacing an AP that is in service but with issues. Over > the years we’ve run into RF issues with the original connectorized 450 APs. > I’ve never established whether it’s the AP or the sector antenna, but > replacing it solves the modulation and V/H ratio issues. > > The same procedure would also apply if you are upgrading to a 450i or 450m AP. > -- > AF mailing list > AF@af.afmug.com <mailto:AF@af.afmug.com> > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > <http://af.afmug.com/mailman/listinfo/af_af.afmug.com>
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
