& he waited behind instead of driving around?

On 08/08/2020 09:51 AM, Ken Hohhof wrote:
Long time ago someone told me a story about driving along some country highway and stopping behind another car at an intersection with a traffic light. And a tornado is coming across the fields headed right for them. There’s not another car for miles, but the guy in front of him wouldn’t go until the light turned green.

*From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Jaime Solorza
*Sent:* Saturday, August 8, 2020 11:22 AM
*To:* AnimalFarm Microwave Users Group <af@af.afmug.com>
*Subject:* Re: [AFMUG] FAA determination ... finally

Lol...

On Sat, Aug 8, 2020, 8:38 AM Ken Hohhof <af...@kwisp.com <mailto:af...@kwisp.com>> wrote:

    Well, we used some wrenches and ropes and of course fall protection.

    *From:* AF <af-boun...@af.afmug.com
    <mailto:af-boun...@af.afmug.com>> *On Behalf Of *Kurt Fankhauser
    *Sent:* Saturday, August 8, 2020 9:14 AM
    *To:* AnimalFarm Microwave Users Group <af@af.afmug.com
    <mailto:af@af.afmug.com>>
    *Subject:* Re: [AFMUG] FAA determination ... finally

    How were you able to put up two 18ghz links on that tower before you
    were able to get an ASR number from the FCC?

    On Fri, Aug 7, 2020 at 12:18 PM Ken Hohhof <af...@kwisp.com
    <mailto:af...@kwisp.com>> wrote:

        Good news, FAA finished their determination on a 45 foot tower
        that has been there for 20 years, and which isn’t higher than
        the power poles between us and the airport.

        It only took them 4 months.

        Not sure what I would have done if they had denied it.  We
        already put up two 18 GHz links off the tower (replacing 5 GHz).

-- AF mailing list
        AF@af.afmug.com <mailto:AF@af.afmug.com>
        http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- AF mailing list
    AF@af.afmug.com <mailto:AF@af.afmug.com>
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com




--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to