Will it handle –48?
From: Josh Luthman
Sent: Friday, August 7, 2020 7:58 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] a real af question
If that's the case, get a Tik and crack open the case. Simply wire 48v right
up - solder and heat shrink would be simple.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Aug 7, 2020 at 9:56 AM Chuck McCown <ch...@wbmfg.com> wrote:
I have a nice sine wave modular exeltech on both ends. Just prefer to be DC
wherever possible.
Sent from my iPhone
On Aug 7, 2020, at 7:13 AM, Josh Luthman <j...@imaginenetworksllc.com>
wrote:
I don't think the MT or Ubnt are 48v out of the box.
With the MT people have regularly popped open the case and then just done
48v bypassing the AC->48VDC PSU.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Aug 6, 2020 at 5:55 PM <ch...@wbmfg.com> wrote:
I think that may be what one of my guys ordered. He was trying to decide
between MT and UBNT.
-----Original Message-----
From: Matt
Sent: Thursday, August 6, 2020 3:34 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] a real af question
> I need to connect two offices with fiber. Going to put a switch on
both
> ends with an SFP.
> 48 volts power. Rack mount. I need a recommendation. I may do
Netonix
> but I would like to hear opinions.
Why not MikroTik CRS rack mount with SFP or SFP+ ports?
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
