If that's the case, get a Tik and crack open the case. Simply wire 48v right up - solder and heat shrink would be simple.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Aug 7, 2020 at 9:56 AM Chuck McCown <ch...@wbmfg.com> wrote: > I have a nice sine wave modular exeltech on both ends. Just prefer to be > DC wherever possible. > > Sent from my iPhone > > On Aug 7, 2020, at 7:13 AM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > > I don't think the MT or Ubnt are 48v out of the box. > > With the MT people have regularly popped open the case and then just done > 48v bypassing the AC->48VDC PSU. > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Thu, Aug 6, 2020 at 5:55 PM <ch...@wbmfg.com> wrote: > >> I think that may be what one of my guys ordered. He was trying to decide >> between MT and UBNT. >> >> -----Original Message----- >> From: Matt >> Sent: Thursday, August 6, 2020 3:34 PM >> To: AnimalFarm Microwave Users Group >> Subject: Re: [AFMUG] a real af question >> >> > I need to connect two offices with fiber. Going to put a switch on >> both >> > ends with an SFP. >> > 48 volts power. Rack mount. I need a recommendation. I may do >> Netonix >> > but I would like to hear opinions. >> >> Why not MikroTik CRS rack mount with SFP or SFP+ ports? >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
