Multiple devices.  So probably just another UBNT switch and connect the two 
switches with SFPs.  

From: Bill Prince 
Sent: Thursday, August 6, 2020 1:02 PM
To: af@af.afmug.com 
Subject: Re: [AFMUG] a real af question

Fiber optic transceivers. 


What's on the other side of the transceivers? One device, two devices, or more?



bp
<part15sbs{at}gmail{dot}com>

On 8/6/2020 11:57 AM, ch...@wbmfg.com wrote:

  Draw two boxes.  Put fiber between the two boxes.  Now, what goes on the end 
of the fiber....?



  From: TJ Trout 
  Sent: Thursday, August 6, 2020 10:56 AM
  To: AnimalFarm Microwave Users Group 
  Subject: Re: [AFMUG] a real af question

  Chuck, i'll design it for you :) hit me off list!

  On Thu, Aug 6, 2020 at 9:39 AM <ch...@wbmfg.com> wrote:

    Yeahbut, what would be a good brand.  Are the FS things OK.  I have had 
good luck with UBNT.  Really don’t want to pay for Cisco.  On second look 
Netonix may not be the best option.  I would really like 48 vdc power but most 
of them don’t have that option.  I have sinewave inverters at both ends so I 
can do AC but I just didn’t want to.  

    From: Lewis Bergman 
    Sent: Thursday, August 6, 2020 10:29 AM
    To: AnimalFarm Microwave Users Group 
    Subject: Re: [AFMUG] a real af question

    They make them in a wide variety of capacity and port configs.

    On Thu, Aug 6, 2020, 10:41 AM <ch...@wbmfg.com> wrote:

      Yeah, I guess I could do media converters.  But the switches on one end 
are a bit old.  I suppose I could put a 48 port POE with SFP on one end and the 
media converter at the other.  

      From: Lewis Bergman 
      Sent: Thursday, August 6, 2020 9:36 AM
      To: AnimalFarm Microwave Users Group 
      Subject: Re: [AFMUG] a real af question

      We always used Plantronics. They may be out of favor now but they make 
industrial switches with DIN mounts that are as small as two ports.

      On Thu, Aug 6, 2020 at 10:05 AM <ch...@wbmfg.com> wrote:

        I need to connect two offices with fiber.  Going to put a switch on 
both ends with an SFP.  
        48 volts power.  Rack mount.  I need a recommendation.  I may do 
Netonix but I would like to hear opinions.  
        -- 
        AF mailing list
        AF@af.afmug.com
        http://af.afmug.com/mailman/listinfo/af_af.afmug.com



      -- 

      Lewis Bergman 
      325-439-0533 Cell

--------------------------------------------------------------------------
      -- 
      AF mailing list
      AF@af.afmug.com
      http://af.afmug.com/mailman/listinfo/af_af.afmug.com

      -- 
      AF mailing list
      AF@af.afmug.com
      http://af.afmug.com/mailman/listinfo/af_af.afmug.com


----------------------------------------------------------------------------
    -- 
    AF mailing list
    AF@af.afmug.com
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com

    -- 
    AF mailing list
    AF@af.afmug.com
    http://af.afmug.com/mailman/listinfo/af_af.afmug.com


------------------------------------------------------------------------------
  -- 
  AF mailing list
  AF@af.afmug.com
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com


   


--------------------------------------------------------------------------------
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to