Fiber optic transceivers.
What's on the other side of the transceivers? One device, two devices, or more?
bp
<part15sbs{at}gmail{dot}com>
On 8/6/2020 11:57 AM, ch...@wbmfg.com
wrote:
Draw two boxes. Put fiber between the two boxes. Now, what goes on the end of the fiber....?Chuck, i'll design it for you :) hit me off list!On Thu, Aug 6, 2020 at 9:39 AM <ch...@wbmfg.com> wrote:
--Yeahbut, what would be a good brand. Are the FS things OK. I have had good luck with UBNT. Really don’t want to pay for Cisco. On second look Netonix may not be the best option. I would really like 48 vdc power but most of them don’t have that option. I have sinewave inverters at both ends so I can do AC but I just didn’t want to.They make them in a wide variety of capacity and port configs.On Thu, Aug 6, 2020, 10:41 AM <ch...@wbmfg.com> wrote:
--Yeah, I guess I could do media converters. But the switches on one end are a bit old. I suppose I could put a 48 port POE with SFP on one end and the media converter at the other.We always used Plantronics. They may be out of favor now but they make industrial switches with DIN mounts that are as small as two ports.On Thu, Aug 6, 2020 at 10:05 AM <ch...@wbmfg.com> wrote:
--I need to connect two offices with fiber. Going to put a switch on both ends with an SFP.48 volts power. Rack mount. I need a recommendation. I may do Netonix but I would like to hear opinions.
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
Lewis Bergman325-439-0533 Cell
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
