Yes ...on same network but not sure on their setup...not configured by us but by Tonka Equipment techs...I can find out..
On Mon, Jul 27, 2020, 7:27 AM Lewis Bergman <lewis.berg...@gmail.com> wrote: > Ahoy Mate!!!! > > Looking good sporting that patch buddy. Where is your parrot? > > On those PLC's, do they have a different gateway setup than the > cradlepoint? they should be responding directly to the IP talking to it so > it shouldn't matter but wondering. The PLC's are on the same network right? > > > On Sun, Jul 26, 2020 at 3:36 PM Jaime Solorza <losguyswirel...@gmail.com> > wrote: > >> We have a Cradlepoint router with static IP and configured with 7 port >> forwarding IPs assigned to 2 PLCs, 4 VFDS and 1 HMI on 192.168.1.xxx >> network plus switch. Currently these devices are on the water companys >> SCADA netwotk going to a router for Internet Access with their tablets. >> I can see the IPs (192.168.1.120-7) on wired devices screen of >> Cradlepoint from my home via remote access. I can ping them and router as >> well. >> We can not access any of the PLCs or other devices at all...they all time >> out..cellular connections are solid...I have zero disconnects to >> Cradlepoint. >> This setup works perfectly well at other locations but difference is that >> other places, the port forward gear is not on a shared network. We have >> Remote IQ Boots to reboot gear at hard to access locations. >> Do you think we need to ask them to add port Forwarding rules on their >> router? >> Should we isolate these 7 devices and just have them on Cradlepoint? >> Thanks guys who are smarter than me.. >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > Lewis Bergman > 325-439-0533 Cell > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
