Arrr From: Jaime Solorza Sent: Sunday, July 26, 2020 2:35 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Explain it to me Lucy
We have a Cradlepoint router with static IP and configured with 7 port forwarding IPs assigned to 2 PLCs, 4 VFDS and 1 HMI on 192.168.1.xxx network plus switch. Currently these devices are on the water companys SCADA netwotk going to a router for Internet Access with their tablets. I can see the IPs (192.168.1.120-7) on wired devices screen of Cradlepoint from my home via remote access. I can ping them and router as well. We can not access any of the PLCs or other devices at all...they all time out..cellular connections are solid...I have zero disconnects to Cradlepoint. This setup works perfectly well at other locations but difference is that other places, the port forward gear is not on a shared network. We have Remote IQ Boots to reboot gear at hard to access locations. Do you think we need to ask them to add port Forwarding rules on their router? Should we isolate these 7 devices and just have them on Cradlepoint? Thanks guys who are smarter than me.. -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
