Arrr shiver me timbers...
On Sun, Jul 26, 2020, 3:17 PM Bill Prince <[email protected]> wrote:
> Aye, but can he talk like a pirate?
>
> bp
> <part15sbs{at}gmail{dot}com>
>
>
> On 7/26/2020 1:53 PM, [email protected] wrote:
>
> Arrr
>
> *From:* Jaime Solorza
> *Sent:* Sunday, July 26, 2020 2:35 PM
> *To:* AnimalFarm Microwave Users Group
> *Subject:* [AFMUG] Explain it to me Lucy
>
> We have a Cradlepoint router with static IP and configured with 7 port
> forwarding IPs assigned to 2 PLCs, 4 VFDS and 1 HMI on 192.168.1.xxx
> network plus switch. Currently these devices are on the water companys
> SCADA netwotk going to a router for Internet Access with their tablets.
> I can see the IPs (192.168.1.120-7) on wired devices screen of
> Cradlepoint from my home via remote access. I can ping them and router as
> well.
> We can not access any of the PLCs or other devices at all...they all time
> out..cellular connections are solid...I have zero disconnects to
> Cradlepoint.
> This setup works perfectly well at other locations but difference is that
> other places, the port forward gear is not on a shared network. We have
> Remote IQ Boots to reboot gear at hard to access locations.
> Do you think we need to ask them to add port Forwarding rules on their
> router?
> Should we isolate these 7 devices and just have them on Cradlepoint?
> Thanks guys who are smarter than me..
>
> ------------------------------
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
