I put a solar panel on my roof to keep my 12 batt topped up.
From: ch...@wbmfg.com
Sent: Tuesday, July 14, 2020 10:17 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] OT new splicing trailer
You need 500 lux to splice. Hard to get that with 12 volt lights.
Your splicer and otdr will run down in the middle of a splice and you will want
a generator.
You will have night work and you will need some higher intensity lights outside
to see inside the handhole etc.
Unless you plan to have a vehicle running to power your 12 volt system you will
want a generator.
Sometimes you have to drop the trailer and drive to get someone while someone
stays behind splicing etc etc etc...
From: Josh Luthman
Sent: Tuesday, July 14, 2020 10:06 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] OT new splicing trailer
I pushed for a generator. The techs resisted and ultimately we ended up
without a generator.
The lights were easier on 12vdc. Propane works so well for heat. AC is at a
loss.
Why do you say we'll eventually want a generator?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Jul 14, 2020 at 11:40 AM <ch...@wbmfg.com> wrote:
I put a Coleman Mach 1 RV AC on the roof.
Make sure you have a carbon monoxide detector inside.
I think you will find that you will eventually want a generator.
From: Josh Luthman
Sent: Tuesday, July 14, 2020 9:14 AM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] OT new splicing trailer
Doing 12vdc in ours.
We use propane for heat and haven't really figured out the air conditioning.
The whole side opens up like a food truck, though. Ohio treats us OK.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Jul 14, 2020 at 10:20 AM Chuck McCown <ch...@wbmfg.com> wrote:
Some have ground rods and wires but mine don’t and I have never seen anyone
do it. The generator is floating with respect to earth so grounding is not
going to improve safety from that aspect.
Sent from my iPhone
On Jul 13, 2020, at 8:02 PM, Jon Langeler <jon-ispli...@michwave.net>
wrote:
Does anyone know? Do splice trailers get grounded for reasons of
generator and/or other reasons while splicing?
Jon Langeler
Michwave Technologies, Inc.
On Jun 23, 2020, at 4:45 PM, ch...@wbmfg.com wrote:
It is double walled, with mineral blankets.
But nothing suspended. Just trying to not interrupt sleep in
residential neighborhoods during night cuts.
Work in progress. We will build another one for our other splice
trailer once we work out the kinks.
Like to be 60 dB at 10 feet.
From: castarritt .
Sent: Tuesday, June 23, 2020 2:04 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] OT new splicing trailer
Neat project. Have you considered making it double walled with some
sort of anti-vibration material or suspension between the inner and outer
layers?
On Tue, Jun 23, 2020 at 1:01 PM Chuck McCown <ch...@wbmfg.com> wrote:
And experimental noise control box for the generator. Getting 10 dB
reduction does far.
Sent from my iPhone--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--------------------------------------------------------------------------------
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
