On close SM's or just an SM in general?
On 6/25/2020 10:29 AM, Josh Luthman wrote:
I think mine started with 4.4.3. Could be wrong.
I get -65 normally but SNMP will show -89 here and there. eAlign shows
-65 give or take a db.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Jun 25, 2020 at 11:07 AM Nate Burke <n...@blastcomm.com
<mailto:n...@blastcomm.com>> wrote:
Because of Internal politics, I have a customer that needed 2
separate
radio feeds. So I have 2 EPMP force 200 radios on the same pole,
about
1' apart.
After upgrading to 4.4.3 these 2 radios give really strange signal
readings. They appear to be working normally, with no complaints
from
the customer. They should be around -70db, but watching the webpage
(Also SNMP reports the same) they will bounce between -70db and -20db
every couple seconds. The EAlign page does not reflect this, it just
stays steady at -70.
Of all the hundreds of EPMP Sm's that I've upgraded to 4.4.3, these 2
are the only ones that have this problem. Is there some sort of self
interference going on because the SM's are so close? They are both
attached to the same AP, no other radio on the AP has this issue. I
don't think I have another location where 2 SM radios are this close
physically. The signal was reporting normally until upgrading to
4.4.3
Anyone else seen this?
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
