I think mine started with 4.4.3. Could be wrong. I get -65 normally but SNMP will show -89 here and there. eAlign shows -65 give or take a db.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jun 25, 2020 at 11:07 AM Nate Burke <n...@blastcomm.com> wrote: > Because of Internal politics, I have a customer that needed 2 separate > radio feeds. So I have 2 EPMP force 200 radios on the same pole, about > 1' apart. > > After upgrading to 4.4.3 these 2 radios give really strange signal > readings. They appear to be working normally, with no complaints from > the customer. They should be around -70db, but watching the webpage > (Also SNMP reports the same) they will bounce between -70db and -20db > every couple seconds. The EAlign page does not reflect this, it just > stays steady at -70. > > Of all the hundreds of EPMP Sm's that I've upgraded to 4.4.3, these 2 > are the only ones that have this problem. Is there some sort of self > interference going on because the SM's are so close? They are both > attached to the same AP, no other radio on the AP has this issue. I > don't think I have another location where 2 SM radios are this close > physically. The signal was reporting normally until upgrading to 4.4.3 > > Anyone else seen this? > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
