we used your chain mount on a tower, worked well On Wed, Apr 22, 2020 at 12:37 PM <ch...@wbmfg.com> wrote:
> I have never used chains on a steel pole. I have on wooden poles. > > *From:* Jaime Solorza > *Sent:* Wednesday, April 22, 2020 11:32 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question > > Chains work as well > > On Wed, Apr 22, 2020, 10:52 AM Steve Jones <thatoneguyst...@gmail.com> > wrote: > >> nm on the bading slits, i was looking at it backward and thought he was >> using bands instead of ubolts >> >> On Wed, Apr 22, 2020 at 11:50 AM Steve Jones <thatoneguyst...@gmail.com> >> wrote: >> >>> unless those have banding slits cut in them, he may want to put some >>> mattresses on the ground to catch the radios when the bands tear. >>> >>> That being said, assuming hes using the 3/4-1 inch bands and the style >>> we used to use, yes, you hammer the clamps. its kind of like kneading >>> dough, you have to roll them with the hammer. I havent used that tool in >>> like 8 years though >>> >>> On Wed, Apr 22, 2020 at 11:46 AM <ch...@wbmfg.com> wrote: >>> >>>> This is what he is installing: >>>> https://www.mccowntech.com/product/heavy-duty-pole-mount-1/ >>>> >>>> *From:* Carl Peterson >>>> *Sent:* Wednesday, April 22, 2020 10:37 AM >>>> *To:* AnimalFarm Microwave Users Group >>>> *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question >>>> >>>> If he can post a quick video of what he is doing I'm sure we could >>>> critique it. I haven't done it myself in a decade but all the gear I put >>>> up on steel poles 10 years ago is still up and hasn't moved. Which of your >>>> brackets is he installing? Only thing I can think is the band isn't >>>> slipping through slots in the bracket and thus isn't getting tightened >>>> properly. >>>> >>>> >>>> >>>> On Wed, Apr 22, 2020 at 11:33 AM <ch...@wbmfg.com> wrote: >>>> >>>>> Yes, he has a banding tool. >>>>> >>>>> *From:* Carl Peterson >>>>> *Sent:* Wednesday, April 22, 2020 10:30 AM >>>>> *To:* AnimalFarm Microwave Users Group >>>>> *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question >>>>> >>>>> Slip? I'm assuming he has a banding tool? >>>>> >>>>> https://www.youtube.com/watch?v=3nLfRYjlnKU >>>>> >>>>> On Wed, Apr 22, 2020 at 11:26 AM <ch...@wbmfg.com> wrote: >>>>> >>>>>> Mitch Koep is in the field attempting to installing one of my pole >>>>>> mounts onto a steel monopole with stainless bands. I personally have >>>>>> never >>>>>> used bands on a steel pole. >>>>>> >>>>>> Any tips or pointers? Does he hammer the clip flat after bending the >>>>>> strap? He is trying it down at the base before hanging a bunch of >>>>>> expensive radios way up in the air and is having the strap slip. >>>>>> >>>>>> This is fairly time sensitive. I am sure Mitch would welcome a call >>>>>> if any of you have some experience with this. I suggested getting some >>>>>> rubber to put under the mount to increase friction. >>>>>> -- >>>>>> AF mailing list >>>>>> AF@af.afmug.com >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Carl Peterson >>>>> >>>>> *PORT NETWORKS* >>>>> >>>>> 401 E Pratt St, Ste 2553 >>>>> >>>>> Baltimore, MD 21202 >>>>> >>>>> (410) 637-3707 >>>>> ------------------------------ >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>> >>>> >>>> -- >>>> >>>> Carl Peterson >>>> >>>> *PORT NETWORKS* >>>> >>>> 401 E Pratt St, Ste 2553 >>>> >>>> Baltimore, MD 21202 >>>> >>>> (410) 637-3707 >>>> ------------------------------ >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
