Chains work as well On Wed, Apr 22, 2020, 10:52 AM Steve Jones <thatoneguyst...@gmail.com> wrote:
> nm on the bading slits, i was looking at it backward and thought he was > using bands instead of ubolts > > On Wed, Apr 22, 2020 at 11:50 AM Steve Jones <thatoneguyst...@gmail.com> > wrote: > >> unless those have banding slits cut in them, he may want to put some >> mattresses on the ground to catch the radios when the bands tear. >> >> That being said, assuming hes using the 3/4-1 inch bands and the style we >> used to use, yes, you hammer the clamps. its kind of like kneading dough, >> you have to roll them with the hammer. I havent used that tool in like 8 >> years though >> >> On Wed, Apr 22, 2020 at 11:46 AM <ch...@wbmfg.com> wrote: >> >>> This is what he is installing: >>> https://www.mccowntech.com/product/heavy-duty-pole-mount-1/ >>> >>> *From:* Carl Peterson >>> *Sent:* Wednesday, April 22, 2020 10:37 AM >>> *To:* AnimalFarm Microwave Users Group >>> *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question >>> >>> If he can post a quick video of what he is doing I'm sure we could >>> critique it. I haven't done it myself in a decade but all the gear I put >>> up on steel poles 10 years ago is still up and hasn't moved. Which of your >>> brackets is he installing? Only thing I can think is the band isn't >>> slipping through slots in the bracket and thus isn't getting tightened >>> properly. >>> >>> >>> >>> On Wed, Apr 22, 2020 at 11:33 AM <ch...@wbmfg.com> wrote: >>> >>>> Yes, he has a banding tool. >>>> >>>> *From:* Carl Peterson >>>> *Sent:* Wednesday, April 22, 2020 10:30 AM >>>> *To:* AnimalFarm Microwave Users Group >>>> *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question >>>> >>>> Slip? I'm assuming he has a banding tool? >>>> >>>> https://www.youtube.com/watch?v=3nLfRYjlnKU >>>> >>>> On Wed, Apr 22, 2020 at 11:26 AM <ch...@wbmfg.com> wrote: >>>> >>>>> Mitch Koep is in the field attempting to installing one of my pole >>>>> mounts onto a steel monopole with stainless bands. I personally have >>>>> never >>>>> used bands on a steel pole. >>>>> >>>>> Any tips or pointers? Does he hammer the clip flat after bending the >>>>> strap? He is trying it down at the base before hanging a bunch of >>>>> expensive radios way up in the air and is having the strap slip. >>>>> >>>>> This is fairly time sensitive. I am sure Mitch would welcome a call >>>>> if any of you have some experience with this. I suggested getting some >>>>> rubber to put under the mount to increase friction. >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>> >>>> >>>> -- >>>> >>>> Carl Peterson >>>> >>>> *PORT NETWORKS* >>>> >>>> 401 E Pratt St, Ste 2553 >>>> >>>> Baltimore, MD 21202 >>>> >>>> (410) 637-3707 >>>> ------------------------------ >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> >>> >>> -- >>> >>> Carl Peterson >>> >>> *PORT NETWORKS* >>> >>> 401 E Pratt St, Ste 2553 >>> >>> Baltimore, MD 21202 >>> >>> (410) 637-3707 >>> >>> ------------------------------ >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
