If he can post a quick video of what he is doing I'm sure we could critique it. I haven't done it myself in a decade but all the gear I put up on steel poles 10 years ago is still up and hasn't moved. Which of your brackets is he installing? Only thing I can think is the band isn't slipping through slots in the bracket and thus isn't getting tightened properly.
On Wed, Apr 22, 2020 at 11:33 AM <ch...@wbmfg.com> wrote: > Yes, he has a banding tool. > > *From:* Carl Peterson > *Sent:* Wednesday, April 22, 2020 10:30 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] Stainless banding - Time Sensitive Question > > Slip? I'm assuming he has a banding tool? > > https://www.youtube.com/watch?v=3nLfRYjlnKU > > On Wed, Apr 22, 2020 at 11:26 AM <ch...@wbmfg.com> wrote: > >> Mitch Koep is in the field attempting to installing one of my pole mounts >> onto a steel monopole with stainless bands. I personally have never used >> bands on a steel pole. >> >> Any tips or pointers? Does he hammer the clip flat after bending the >> strap? He is trying it down at the base before hanging a bunch of >> expensive radios way up in the air and is having the strap slip. >> >> This is fairly time sensitive. I am sure Mitch would welcome a call if >> any of you have some experience with this. I suggested getting some rubber >> to put under the mount to increase friction. >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > > Carl Peterson > > *PORT NETWORKS* > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > > ------------------------------ > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- Carl Peterson *PORT NETWORKS* 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
