Nope, but this appears to be the spec sheet: http://airpax.sensata.com/pdfs/ial.pdf
-----Original Message----- From: AF <af-boun...@af.afmug.com> On Behalf Of Mark - Myakka Technologies Sent: Tuesday, July 2, 2019 2:37 PM To: 'AnimalFarm Microwave Users Group' <af@af.afmug.com> Subject: [AFMUG] LELK1-1REC4-34171 breaker Was working on the -48vdc power plant the last few days due to battery issues. Noticed that what I though was a breaker, may not be a breaker. I have a total of 6 of these LELK1-1REC4-34171 in the system. They show they have a delay and make mention they are "Special Purpose Not for General use" Anyone familiar with these? They have the normal on/off switch of a normal breaker. But I discovered that even in the off position current is being passed. I find it hard to belive I have six bad units that have been purchased from multiple places over the past years. Are they designed this way? Is so, what is their purpose? Seems like a bit of a safety risk. -- Thanks, Mark mailto:m...@mailmt.com Myakka Technologies, Inc. www.Myakka.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
