We have over 100 450m’s deployed.
Lots of dense towers.
Fork lift upgrade of a Mikrotik network (still ongoing).
Over 150 customers on over a dozen of the 450m’s, have had over 200
customers and it performed fine.
670Mbps aggregate capacity in 40Mhz channels
If you have the customer density, they are magical.
On 19 Jun 2019, at 12:23, Josh Baird wrote:
We have a site that has 3-4 fairly loaded ePMP 2K sectors (30 deg
horns).
There are a large number of customers in a single 90 degrees. While
we
could probably upgrade to ePMP 3K to get a bit of a boost, there is
still a
cost associated in replacing all the CPE to get the full benefit.
At this point, we're trying to determine if something like 450M makes
sense
for this 90 degrees of coverage. The cost is obviously much higher,
but I
think it may be a better solution in the long run. If we could find a
spare
20Mhz, we could run both our existing ePMP radios and the 450M at the
same
time while we cut subscribers over.
Are there other people here who have been in similar situations and
have
deployed 450M? I realize the performance of the 450M is dependent
upon CPE
locations, but overall, were you happy with the boost in performance
in
general? I feel like most people who have upgraded to 450M were
already
running 450, so you didn't really have to forklift all CPE. If that
were
the case, I think it would be a no-brainer.
Interested in hearing any success (or failure) stories about people
who
have upgraded to 450M...
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
