I solved my problem by picking up one of these at Best Buy and leaving it for the installer. BTW we typically use a small rechargeable amplified speaker off Amazon. The C2G extension cables we already had wouldn’t fit into the 450b mid gain, because the molded plastic part wasn’t “slim” at the male end, it was more like the female on this cable.
From: AF <af-boun...@af.afmug.com> On Behalf Of Adam Moffett Sent: Monday, March 11, 2019 2:45 PM To: af@af.afmug.com Subject: Re: [AFMUG] need headphone cable with slim plug to fit 450b mid gain The white one that used to come with an iPhone is a bit skinnier than average. My calipers are in my other office, so I can't measure it at the moment, but attached pic shows it side by side with a more "normal" sized plug. I searched Amazon for "iphone 3.5mm headphones", and they seem to have clones for $12 or so. I seem to recall you preferred headphones to earbuds, but that's my only idea at the moment. I don't think I've ever seen the outer width of the barrel specified. -Adam On 3/11/2019 3:32 PM, Ken Hohhof wrote: What was needed was a “slim” body, the plastic or rubber molded part between the metal and the cable. Cambium puts the hole for the jack right up against the body of the radio so many plugs are too fat. I’m not talking about the diameter of the metal part, that’s 3.5mm.
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
