I have always done SSH from RouterOS. If you made a gateway mistake you don't need to do anything else, but if you did a bad IP you can just use static ARP and 169.254.1.1 (or add a similar bad IP).
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Nov 12, 2018 at 9:06 AM, Joe Novak <jno...@lrcomm.com> wrote: > Same here. It for sure worked one or two versions back.. I mucked a > gateway and had to fix it via mac telnet. > > On Sun, Nov 11, 2018 at 8:46 PM Josh Luthman <j...@imaginenetworksllc.com> > wrote: > >> Well I can't mac-telnet to a 3.5.1 on the eth port...wonder why... >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Fri, Nov 9, 2018 at 5:43 PM, Mathew Howard <mhoward...@gmail.com> >> wrote: >> >>> It seems to only work from the ethernet side on SMs. I tried it on a >>> link between two of our towers (I have access to Mikrotiks on both ends of >>> the link), and I can mac-telnet to the SM from the Mikrotik that's local to >>> it, but I can't on the one on the other end of the link. The AP works from >>> both Mikrotiks. >>> >>> Also, I think mac-telnet was a fairly recent addition, 3.3 probably >>> doesn't support it. >>> >>> On Fri, Nov 9, 2018 at 3:47 PM Josh Luthman <j...@imaginenetworksllc.com> >>> wrote: >>> >>>> You CAN mac-telnet to eth ports? To an AP? I can't get that to work >>>> myself. What versions are you able to make work? >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Fri, Nov 9, 2018 at 2:38 PM, Justin Marshal <just...@pdmnet.net> >>>> wrote: >>>> >>>>> Yeah, I would think the same thing. If I’m able to get the CDP/LLDP >>>>> packets I should be able to mac-telnet to it. >>>>> >>>>> >>>>> >>>>> I’m able to mac-telnet to the ethernet side, just not the wlan side. >>>>> >>>>> I can mac-telnet to an SM from a routerOS device at the customer’s >>>>> location but I would like to be able to reach it from the tower through >>>>> the >>>>> wlan. >>>>> >>>>> It’s almost like mac-telnet is enabled on the ethernet interface and >>>>> not the wlan interface, even though LLDP/CDP get sent for both interfaces. >>>>> >>>>> I wish changing the password helped, but it doesn’t seem to make a >>>>> difference. >>>>> >>>>> >>>>> >>>>> I do appreciate the suggestions… >>>>> >>>>> >>>>> >>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Josh Luthman >>>>> *Sent:* Friday, November 09, 2018 1:52 PM >>>>> >>>>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>> anyone ever gotten this working? >>>>> >>>>> >>>>> >>>>> If you're getting those ARP layer 2 packets and can ping it, surely >>>>> you have to be able to mac-telnet (unless the application denies you). >>>>> Defaults should work once you've changed the password according to the >>>>> GUI. >>>>> >>>>> >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> >>>>> >>>>> On Fri, Nov 9, 2018 at 11:10 AM, Justin Marshal <just...@pdmnet.net> >>>>> wrote: >>>>> >>>>> Me either >>>>> >>>>> >>>>> >>>>> Wondering if there’s a setting that I’m overlooking in the AP that >>>>> keeps it from happening (SM Isolation, etc) >>>>> >>>>> >>>>> >>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Josh Luthman >>>>> *Sent:* Friday, November 09, 2018 11:05 AM >>>>> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >>>>> >>>>> >>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>> anyone ever gotten this working? >>>>> >>>>> >>>>> >>>>> I can't get into any SM from the wireless side (the MAC we see in >>>>> neighbors is wireless). >>>>> >>>>> >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> >>>>> >>>>> On Fri, Nov 9, 2018 at 10:58 AM, Justin Marshal <just...@pdmnet.net> >>>>> wrote: >>>>> >>>>> Hmm… >>>>> >>>>> >>>>> >>>>> I’m only seeing one mac address for each SM. It’s seeing the wireless >>>>> MAC address… >>>>> >>>>> This is directly from a Mikrotik at the tower, through a bridged AP, >>>>> to a bridged SM. >>>>> >>>>> >>>>> >>>>> I do see 2 MAC Addresses for our AP’s, but I’m trying to MAC telnet >>>>> into the SM’s. When doing a mac-telnet to the AP, it works fine when >>>>> connecting to the wireless MAC even though I’m coming in through the >>>>> ethernet side of things (weird) >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> I tried changing the MAC to the ethernet interface of the SM just to >>>>> say I tried it but that didn’t work either…. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Thanks for the suggestion >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mathew Howard >>>>> *Sent:* Friday, November 09, 2018 10:41 AM >>>>> *To:* AFMUG <af@af.afmug.com> >>>>> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has >>>>> anyone ever gotten this working? >>>>> >>>>> >>>>> >>>>> It works fine for me, but it looks like you need to use the wireless >>>>> MAC address, and not the ethernet MAC (this is on an AP in bridge mode, an >>>>> SM in router mode would be different, I assume). I initially just right >>>>> clicked on the MAC in the neighbor list in Winbox, and selected MAC, and >>>>> it >>>>> connected fine... after that, I realized both MAC addresses were there, so >>>>> I tried the other one, and it just disconnected. >>>>> >>>>> >>>>> >>>>> On Fri, Nov 9, 2018 at 9:28 AM Justin Marshal <just...@pdmnet.net> >>>>> wrote: >>>>> >>>>> Hi, >>>>> >>>>> >>>>> >>>>> I'm trying to get mac-telnet to work from a RouterOS device to an ePMP >>>>> and it doesn't seem to be working. >>>>> >>>>> >>>>> >>>>> It immediately closes the connection as soon as i enter the password. >>>>> >>>>> When i hold my mouse over the tooltip on the setting for mac-telnet >>>>> under configuration->system, it tells me that I need to change the >>>>> password >>>>> for it to work. I have done that and I am still getting the same results. >>>>> >>>>> >>>>> >>>>> Has anybody ever gotten mac-telnet to work from a RoterOS device >>>>> connecting to an ePMP and if so, what is the trick? >>>>> >>>>> >>>>> >>>>> Thanks >>>>> >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>>> >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>>> >>>>> >>>>> -- >>>>> AF mailing list >>>>> AF@af.afmug.com >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>>> >>>> -- >>>> AF mailing list >>>> AF@af.afmug.com >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> >>> -- >>> AF mailing list >>> AF@af.afmug.com >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >>> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
