It seems to only work from the ethernet side on SMs. I tried it on a link between two of our towers (I have access to Mikrotiks on both ends of the link), and I can mac-telnet to the SM from the Mikrotik that's local to it, but I can't on the one on the other end of the link. The AP works from both Mikrotiks.
Also, I think mac-telnet was a fairly recent addition, 3.3 probably doesn't support it. On Fri, Nov 9, 2018 at 3:47 PM Josh Luthman <j...@imaginenetworksllc.com> wrote: > You CAN mac-telnet to eth ports? To an AP? I can't get that to work > myself. What versions are you able to make work? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Nov 9, 2018 at 2:38 PM, Justin Marshal <just...@pdmnet.net> wrote: > >> Yeah, I would think the same thing. If I’m able to get the CDP/LLDP >> packets I should be able to mac-telnet to it. >> >> >> >> I’m able to mac-telnet to the ethernet side, just not the wlan side. >> >> I can mac-telnet to an SM from a routerOS device at the customer’s >> location but I would like to be able to reach it from the tower through the >> wlan. >> >> It’s almost like mac-telnet is enabled on the ethernet interface and not >> the wlan interface, even though LLDP/CDP get sent for both interfaces. >> >> I wish changing the password helped, but it doesn’t seem to make a >> difference. >> >> >> >> I do appreciate the suggestions… >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Josh Luthman >> *Sent:* Friday, November 09, 2018 1:52 PM >> >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has anyone >> ever gotten this working? >> >> >> >> If you're getting those ARP layer 2 packets and can ping it, surely you >> have to be able to mac-telnet (unless the application denies you). >> Defaults should work once you've changed the password according to the GUI. >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Fri, Nov 9, 2018 at 11:10 AM, Justin Marshal <just...@pdmnet.net> >> wrote: >> >> Me either >> >> >> >> Wondering if there’s a setting that I’m overlooking in the AP that keeps >> it from happening (SM Isolation, etc) >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Josh Luthman >> *Sent:* Friday, November 09, 2018 11:05 AM >> *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> >> >> >> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has anyone >> ever gotten this working? >> >> >> >> I can't get into any SM from the wireless side (the MAC we see in >> neighbors is wireless). >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Fri, Nov 9, 2018 at 10:58 AM, Justin Marshal <just...@pdmnet.net> >> wrote: >> >> Hmm… >> >> >> >> I’m only seeing one mac address for each SM. It’s seeing the wireless >> MAC address… >> >> This is directly from a Mikrotik at the tower, through a bridged AP, to a >> bridged SM. >> >> >> >> I do see 2 MAC Addresses for our AP’s, but I’m trying to MAC telnet into >> the SM’s. When doing a mac-telnet to the AP, it works fine when connecting >> to the wireless MAC even though I’m coming in through the ethernet side of >> things (weird) >> >> >> >> >> >> I tried changing the MAC to the ethernet interface of the SM just to say >> I tried it but that didn’t work either…. >> >> >> >> >> >> Thanks for the suggestion >> >> >> >> >> >> *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mathew Howard >> *Sent:* Friday, November 09, 2018 10:41 AM >> *To:* AFMUG <af@af.afmug.com> >> *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has anyone >> ever gotten this working? >> >> >> >> It works fine for me, but it looks like you need to use the wireless MAC >> address, and not the ethernet MAC (this is on an AP in bridge mode, an SM >> in router mode would be different, I assume). I initially just right >> clicked on the MAC in the neighbor list in Winbox, and selected MAC, and it >> connected fine... after that, I realized both MAC addresses were there, so >> I tried the other one, and it just disconnected. >> >> >> >> On Fri, Nov 9, 2018 at 9:28 AM Justin Marshal <just...@pdmnet.net> wrote: >> >> Hi, >> >> >> >> I'm trying to get mac-telnet to work from a RouterOS device to an ePMP >> and it doesn't seem to be working. >> >> >> >> It immediately closes the connection as soon as i enter the password. >> >> When i hold my mouse over the tooltip on the setting for mac-telnet under >> configuration->system, it tells me that I need to change the password for >> it to work. I have done that and I am still getting the same results. >> >> >> >> Has anybody ever gotten mac-telnet to work from a RoterOS device >> connecting to an ePMP and if so, what is the trick? >> >> >> >> Thanks >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
