You CAN mac-telnet to eth ports? To an AP? I can't get that to work myself. What versions are you able to make work?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Nov 9, 2018 at 2:38 PM, Justin Marshal <just...@pdmnet.net> wrote: > Yeah, I would think the same thing. If I’m able to get the CDP/LLDP > packets I should be able to mac-telnet to it. > > > > I’m able to mac-telnet to the ethernet side, just not the wlan side. > > I can mac-telnet to an SM from a routerOS device at the customer’s > location but I would like to be able to reach it from the tower through the > wlan. > > It’s almost like mac-telnet is enabled on the ethernet interface and not > the wlan interface, even though LLDP/CDP get sent for both interfaces. > > I wish changing the password helped, but it doesn’t seem to make a > difference. > > > > I do appreciate the suggestions… > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of * Josh Luthman > *Sent:* Friday, November 09, 2018 1:52 PM > > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has anyone > ever gotten this working? > > > > If you're getting those ARP layer 2 packets and can ping it, surely you > have to be able to mac-telnet (unless the application denies you). > Defaults should work once you've changed the password according to the GUI. > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Fri, Nov 9, 2018 at 11:10 AM, Justin Marshal <just...@pdmnet.net> > wrote: > > Me either > > > > Wondering if there’s a setting that I’m overlooking in the AP that keeps > it from happening (SM Isolation, etc) > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Josh Luthman > *Sent:* Friday, November 09, 2018 11:05 AM > *To:* AnimalFarm Microwave Users Group <af@af.afmug.com> > > > *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has anyone > ever gotten this working? > > > > I can't get into any SM from the wireless side (the MAC we see in > neighbors is wireless). > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Fri, Nov 9, 2018 at 10:58 AM, Justin Marshal <just...@pdmnet.net> > wrote: > > Hmm… > > > > I’m only seeing one mac address for each SM. It’s seeing the wireless MAC > address… > > This is directly from a Mikrotik at the tower, through a bridged AP, to a > bridged SM. > > > > I do see 2 MAC Addresses for our AP’s, but I’m trying to MAC telnet into > the SM’s. When doing a mac-telnet to the AP, it works fine when connecting > to the wireless MAC even though I’m coming in through the ethernet side of > things (weird) > > > > > > I tried changing the MAC to the ethernet interface of the SM just to say I > tried it but that didn’t work either…. > > > > > > Thanks for the suggestion > > > > > > *From:* AF <af-boun...@af.afmug.com> *On Behalf Of *Mathew Howard > *Sent:* Friday, November 09, 2018 10:41 AM > *To:* AFMUG <af@af.afmug.com> > *Subject:* Re: [AFMUG] mac telnet from RouterOS to an ePMP, has anyone > ever gotten this working? > > > > It works fine for me, but it looks like you need to use the wireless MAC > address, and not the ethernet MAC (this is on an AP in bridge mode, an SM > in router mode would be different, I assume). I initially just right > clicked on the MAC in the neighbor list in Winbox, and selected MAC, and it > connected fine... after that, I realized both MAC addresses were there, so > I tried the other one, and it just disconnected. > > > > On Fri, Nov 9, 2018 at 9:28 AM Justin Marshal <just...@pdmnet.net> wrote: > > Hi, > > > > I'm trying to get mac-telnet to work from a RouterOS device to an ePMP and > it doesn't seem to be working. > > > > It immediately closes the connection as soon as i enter the password. > > When i hold my mouse over the tooltip on the setting for mac-telnet under > configuration->system, it tells me that I need to change the password for > it to work. I have done that and I am still getting the same results. > > > > Has anybody ever gotten mac-telnet to work from a RoterOS device > connecting to an ePMP and if so, what is the trick? > > > > Thanks > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
