Ok. That was pretty bad. It's the Lewis translator still active? On Wed, Jul 4, 2018, 3:43 PM Rory Conaway <[email protected]> wrote:
> Aren’t the Trill switches limited to 1Gbps so far? > > > > Rory > > > > *From:* AF [mailto:[email protected]] *On Behalf Of *Harold Bledsoe > *Sent:* Wednesday, July 4, 2018 12:59 PM > > > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] G.8032v2 or ERPS ring with 10G wireless links > > > > Trill! 😀 > > > > On Tue, Jul 3, 2018 at 10:50 AM Carl Peterson <[email protected]> > wrote: > > > > After moving most of our network over to VPLS, I'm working on pushing 10G > further into the network. It doesn't make a lot of sense to do this with > routers (cost & power) and since we use a lot of Calix gear for our GPON > and already have some of it in place it makes sense to me to just set up a > 10G ring and hang routers off of that where we need them. A couple of the > legs are going to be wireless 10G links for now so I'm looking for feedback > on G.8032v2 vs ERPS rings with wireless paths. > > > > Going to be running ~20-30 Service VLANs with multiple CVLANS and 20-30 > other single tagged VLANs over the ring (router to router, dedicated links, > etc). The only drawback I see is the inability to do traffic engineering > the way we an with MPLS VPLS but I'll still have that with the transport to > the core ring. > > > > Any gotchas I should look for? Issues with wireless? benefits of one vs > the other? > > > > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > > Harold Bledsoe > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
