Carl,
Are you using FS.com switches?
-Adam
On 7/3/2018 11:49 AM, Carl Peterson wrote:
After moving most of our network over to VPLS, I'm working on pushing
10G further into the network. It doesn't make a lot of sense to do
this with routers (cost & power) and since we use a lot of Calix gear
for our GPON and already have some of it in place it makes sense to me
to just set up a 10G ring and hang routers off of that where we need
them. A couple of the legs are going to be wireless 10G links for now
so I'm looking for feedback on G.8032v2 vs ERPS rings with wireless
paths.
Going to be running ~20-30 Service VLANs with multiple CVLANS and
20-30 other single tagged VLANs over the ring (router to router,
dedicated links, etc). The only drawback I see is the inability to do
traffic engineering the way we an with MPLS VPLS but I'll still have
that with the transport to the core ring.
Any gotchas I should look for? Issues with wireless? benefits of one
vs the other?
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
