Hello Richard, I do not think problem is so simple.
> Check the dsmerror.log on the client for possible error indications. There is nothing in dsmerror.log. > Assure that the TSM server parameters for the client have it going at client > port 1501 for the session, and not some odd port. IP Address and port is not set, so default is 1501. Client options are not set as well. > From the TSM server system, at an OS prompt, do 'telnet <ClientNetname> 1501': [tsmsrv1][/tsm/bin]>tn sms-prodsrv 1501 Trying... Connected to sms-prodsrv.bkme.com. Escape character is '^T'. tn> In dsmerror.log: 04/13/2010 14:42:01 sessInit: Starting communications initialization 04/13/2010 14:42:01 sessInit: Transitioning: sInit state ===> sTRANSERR state 04/13/2010 14:42:02 ANS0361I DIAG: Error reading http request. > Use the TSM server command 'DEFine CLIENTAction' to perform a test command: Command: 'define clientaction sms-prodsrv action=incremental objects=D:' IBM Tivoli Storage Manager Command Line Administrative Interface - Version 5, Release 4, Level 2.0 (c) Copyright by IBM Corporation and other(s) 1990, 2008. All Rights Reserved. Session established with server BKME: AIX-RS/6000 Server Version 5, Release 5, Level 4.1 Server date/time: 04/13/2010 14:46:53 Last access: 04/13/2010 14:42:24 ANS8000I Server command: 'define clientaction sms-prodsrv action=incremental objects=D:' ANR2500I Schedule @1 defined in policy domain NT. ANR2510I Node SMS-PRODSRV associated with schedule @1 in policy domain NT. ANR2505I 1 schedules were defined for DEFINE CLIENTACTION. ANS8002I Highest return code was 0. Incremental backup for D: has been done immediately: ANS8000I Server command: 'q act or=client node=sms-prodsrv' Date/Time: 04/13/2010 14:50:40 Message: ANE4952I (Session: 18109, Node: SMS-PRODSRV) Total number of objects inspected: 23,119(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4954I (Session: 18109, Node: SMS-PRODSRV) Total number of objects backed up: 70(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4958I (Session: 18109, Node: SMS-PRODSRV) Total number of objects updated: 0(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4960I (Session: 18109, Node: SMS-PRODSRV) Total number of objects rebound: 0(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4957I (Session: 18109, Node: SMS-PRODSRV) Total number of objects deleted: 0(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4970I (Session: 18109, Node: SMS-PRODSRV) Total number of objects expired: 0(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4959I (Session: 18109, Node: SMS-PRODSRV) Total number of objects failed: 0(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4965I (Session: 18109, Node: SMS-PRODSRV) Total number of subfile objects: 0(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4977I (Session: 18109, Node: SMS-PRODSRV) Total number of bytes inspected: 3.51 GB(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4961I (Session: 18109, Node: SMS-PRODSRV) Total number of bytes transferred: 26.51 MB(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4963I (Session: 18109, Node: SMS-PRODSRV) Data transfer time: 0.03 sec(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4966I (Session: 18109, Node: SMS-PRODSRV) Network data transfer rate: 848,592.83 KB/sec(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4967I (Session: 18109, Node: SMS-PRODSRV) Aggregate data transfer rate: 574.89 KB/sec(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4968I (Session: 18109, Node: SMS-PRODSRV) Objects compressed by: 77%(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4976I (Session: 18109, Node: SMS-PRODSRV) Total data reduction ratio: 99.27%(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4969I (Session: 18109, Node: SMS-PRODSRV) Subfile objects reduced by: 0%(SESSION: 18109) Date/Time: 04/13/2010 14:50:40 Message: ANE4964I (Session: 18109, Node: SMS-PRODSRV) Elapsed processing time: 00:00:47(SESSION: 18109) ANS8002I Highest return code was 0. I have an idea about a source of problem. I have MS SQL database on the same server. There is dedicated node name and scheduler for SQL database. So I am running two schedulers and only one CAD service. Everything was working fine with TSM Client 6.1.3.2, but I have upgraded this server to 6.2.0.0 recently and started to have this problem. I have found something strange on server. Command "netstat -a" gives: TCP sms-prodsrv:ms-sql-s sms-prodsrv.KUWAIT.AUB.NET:0 LISTENING TCP sms-prodsrv:1501 sms-prodsrv.KUWAIT.AUB.NET:0 LISTENING TCP sms-prodsrv:1501 sms-prodsrv.KUWAIT.AUB.NET:0 LISTENING TCP sms-prodsrv:1581 sms-prodsrv.KUWAIT.AUB.NET:0 LISTENING As you see there are two (???????!!!!!!!!) LISTENNING for port 1501. My minimal knowledge in TCP/IP says it is impossible. What do you think about it? Regards, Grigori G. Solonovitch Senior Technical Architect Information Technology Ahli United Bank Kuwait http://www.ahliunited.com.kw Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail: grigori.solonovi...@ahliunited.com Please consider the environment before printing this Email -----Original Message----- From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of Richard Sims Sent: Tuesday, April 13, 2010 2:22 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Scheduler problem Grigori - Some ways to pursue... Check the dsmerror.log on the client for possible error indications. Assure that the TSM server parameters for the client have it going at client port 1501 for the session, and not some odd port. >From the TSM server system, at an OS prompt, do 'telnet <ClientNetname> 1501': When you do Ctrl+], then press Enter to get the "telnet>" prompt, and then quit, the client dsmerror log should contain like: 04/13/10 07:13:24 sessInit: Starting communications initialization 04/13/10 07:13:24 sessInit: Transitioning: sInit state ===> sTRANSERR state This verifies physical connectability from server to client, as in no firewalling preventing access. Use the TSM server command 'DEFine CLIENTAction' to perform a test command which will leave evidence on the client, such as a command to report time of day, directed to a file. (DEFine CLIENTAction may take a while to kick off, so give it some time.) Richard Sims Please consider the environment before printing this Email. ________________________________ CONFIDENTIALITY AND WAIVER: The information contained in this electronic mail message and any attachments hereto may be legally privileged and confidential. The information is intended only for the recipient(s) named in this message. If you are not the intended recipient you are notified that any use, disclosure, copying or distribution is prohibited. If you have received this in error please contact the sender and delete this message and any attachments from your computer system. We do not guarantee that this message or any attachment to it is secure or free from errors, computer viruses or other conditions that may damage or interfere with data, hardware or software.
