yes Þórður
Kvedja/Regards Petur Eythorsson Taeknimadur/Technician IBM Certified Specialist - AIX Tivoli Storage Manager Certified Professional Microsoft Certified System Engineer [EMAIL PROTECTED] Nyherji Hf Simi TEL: +354-569-7700 Borgartun 37 105 Iceland URL: http://www.nyherji.is -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Þórður Aðalsteinsson Sent: 4. mars 2002 08:25 To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Have you queried your drives to make sure that you have two drives that are "online"? Like this? tsm: TSM_SERVER1>q drive Library Name Drive Name Device Type On-Line ------------ ------------ ----------- ------------------- LB0.0.0.2 GENDRV_TAPE0 GENERICTAPE Yes LB0.0.0.2 GENDRV_TAPE1 GENERICTAPE Yes -----Original Message----- From: Jack Musselman [mailto:[EMAIL PROTECTED]] Sent: 4. mars 2002 05:56 To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Have you queried your drives to make sure that you have two drives that are "online"? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Þórður Aðalsteinsson Sent: Sunday, March 03, 2002 2:47 PM To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hi and thanx Are you refering to the client node, if so then i have updated the mountlimit to two and still the same result. -----Original Message----- From: Jack Musselman [mailto:[EMAIL PROTECTED]] Sent: 3. mars 2002 17:27 To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Check your node setting, is the mountlimit set to two? -----Original Message----- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of Þórður Aðalsteinsson Sent: Sunday, March 03, 2002 4:25 AM To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hi, This is a clean install so migration has newer been possible and yes i have two drives available online -----Original Message----- From: TAZ [mailto:[EMAIL PROTECTED]] Sent: 2. mars 2002 23:49 To: [EMAIL PROTECTED] Subject: Re: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hello, Was migration possible prior to upgrading? Its not clear from you description if you actually have 2 available drives. Check your drives and make certain you are not retaining a cleaning tape in one drive. Sam ----- Original Message ----- From: "^srpur Apalsteinsson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, March 02, 2002 5:26 PM Subject: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hi y4all I am installing TSM 4.2.1.9 on Win NT, I have a Dell PowerVault 128T library. My problem is that when migrating from disk to tape I get this right away, ANR0984I Process 28 for MIGRATION started in the BACKGROUND at 23:20:49. ANR1000I Migration process 28 started for storage pool DISKPOOL. ANR1134W Migration terminated for storage pool DISKPOOL - insufficient number of mount points available for removable media. ANR0985I Process 28 for MIGRATION running in the BACKGROUND completed with completion state FAILURE at 23:20:49. ANR1002I Migration for storage pool DISKPOOL will be retried in 60 seconds. ANR1003I Migration retry delay ended; checking migration status for storage pool DISKPOOL. However im able to label and checkin volumes without any problems I have changed the mount limit from drives to 2 (update dev ltoclass1 libr=lb0.0.0.2 devtype=lto mountlimit=2). That changed nothing My feeling is that im overlooking somthing in the config of the library or drives I also have a newer version of firmware then the one tested with TSM. Would changing OS4s do anything, go to W2K? Best regards ^srpur Apalsteinsson MCSE, MCP+I Margmiplun Internet, Fyrirtfkja~jsnusta Supurlandsbraut 4 105, Reykjavmk Smmi 575 7000 e-mail: [EMAIL PROTECTED] www.mi.is
