Þórður, How many tape drives do you have? Are they all 'on-line' (q dr).
Have you set a mountlimit='drives' (or # of drives) in your device class? On your primary disk storage pools you should also manage the number of migration processes as each will take a tape drive. ----- Original Message ----- From: "Þórður Aðalsteinsson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, March 02, 2002 4:26 PM Subject: TSM 4.2.1.9 on Win NT, insufficient number of mount points Hi y´all I am installing TSM 4.2.1.9 on Win NT, I have a Dell PowerVault 128T library. My problem is that when migrating from disk to tape I get this right away, ANR0984I Process 28 for MIGRATION started in the BACKGROUND at 23:20:49. ANR1000I Migration process 28 started for storage pool DISKPOOL. ANR1134W Migration terminated for storage pool DISKPOOL - insufficient number of mount points available for removable media. ANR0985I Process 28 for MIGRATION running in the BACKGROUND completed with completion state FAILURE at 23:20:49. ANR1002I Migration for storage pool DISKPOOL will be retried in 60 seconds. ANR1003I Migration retry delay ended; checking migration status for storage pool DISKPOOL. However im able to label and checkin volumes without any problems I have changed the mount limit from drives to 2 (update dev ltoclass1 libr=lb0.0.0.2 devtype=lto mountlimit=2). That changed nothing My feeling is that im overlooking somthing in the config of the library or drives I also have a newer version of firmware then the one tested with TSM. Would changing OS´s do anything, go to W2K? Best regards Þórður Aðalsteinsson MCSE, MCP+I Margmiðlun Internet, Fyrirtækjaþjónusta Suðurlandsbraut 4 105, Reykjavík Sími 575 7000 e-mail: [EMAIL PROTECTED] www.mi.is
