Doug,
There is no mechanism wherein you can take two physical libraries and
make them into one via software. There is no hardware option to combine
two 3570 libraries into one.
3575 libraries can be configured with something like a dozen 3570
drives.
Steffan
Doug McLauchlan wrote:
>
> Hi all, we have 2 3570B12 Magstar units each has 2 drives, (each unit are
> on separate scsi's but same address). I currently have 2 libraries defined
> in ADSM each with 1 unit in each. I want to be able to have 1 library with
> all 4 drives in it but don't know if this is possible because the element
> numbers for both unit's are 16 & 17. Has anyone been able to configure more
> than 2 3570 drives in a library ?
> We have TSM 3.7.2 & AIX 4.3.2.0
>
> Thanks
> Doug McLauchlan
> Woolworths (NZ) Ltd
> email [EMAIL PROTECTED]
> DISCLAIMER: "The information in this email and in any attachments is confidential
>and intended solely for the attention and use of the addressee(s). If this email is
>not intended for you, you must not use, read, distribute or copy it. If you have
>received this email by mistake please call the sender immediately on 64-9-2620772 and
>erase the email and any attachments, and any copies of the same. Internet
>communications are not secure and therefore Woolworths (NZ) Ltd does not accept legal
>responsibility for the contents of this message. Any views or opinions expressed are
>solely those of the author and do not necessarily represent those of Woolworths (NZ)
>Ltd unless specifically stated."
--
Regards,
Steffan Rhoads
Principal SAN Architect
Professional Services
Inrange Technologies Corporation
714-731-5474 - Voice
877-681-2781 - 2-way Pager
or [EMAIL PROTECTED]
714-832-9181 - Fax
