Hi all, we have 2 3570B12 Magstar units each has 2 drives, (each unit are
on separate scsi's but same address). I currently have 2 libraries defined
in ADSM each with 1 unit in each. I want to be able to have 1 library with
all 4 drives in it but don't know if this is possible because the element
numbers for both unit's are 16 & 17. Has anyone been able to configure more
than 2 3570 drives in a library ?
We have TSM 3.7.2 & AIX 4.3.2.0
Thanks
Doug McLauchlan
Woolworths (NZ) Ltd
email [EMAIL PROTECTED]
DISCLAIMER: "The information in this email and in any attachments is confidential and
intended solely for the attention and use of the addressee(s). If this email is not
intended for you, you must not use, read, distribute or copy it. If you have received
this email by mistake please call the sender immediately on 64-9-2620772 and erase the
email and any attachments, and any copies of the same. Internet communications are not
secure and therefore Woolworths (NZ) Ltd does not accept legal responsibility for the
contents of this message. Any views or opinions expressed are solely those of the
author and do not necessarily represent those of Woolworths (NZ) Ltd unless
specifically stated."
